Intelligent Computer Solutions CBDR-0406-000A Manuale Utente

Chapter 3 – Installation

d. Load the appropriate eSATA PCI or PCI-Express controller card drivers.

NOTE: Refer to the card manufacturer’s instructions for appropriate driver

installation instructions.

e. Connect the SDL’s eSATA connector, located on the back of the unit, to the

PC’s internal eSATA interface using the supplied eSATA-to-S-ATA interface
cable.

NOTE: Most eSATA controller cards use an S-ATA type connector for its

internal port and an eSATA type connector for its external port.

d. Connect a PC’s available power supply cable to the SDL’s Power Connector,

located on the back of the unit.

f. Close PCs cover.