Smart FSSBID 100 Manuale Utente

1010651 Rev C1

A B O U T   Y O U R   S M A R T   M O B I L E   S T A N D

Power Specifications

Your SMART Mobile Stand’s user friendly power management design 

accommodates up to 1.2 kW and includes the following features:

•

A country-specific power bar—North America (NEMA) 110V AC 

or IEC 240V, 50 Hz—which provides power access for additional devices 

near the bottom rear of your stand

•

An 8' (2.44 m) country-specific power cord (international only)

•

A country-specific extension cable

•

Country-specific power adapters 

•

A USB 2.0 cable

Hardware and Internet Connection 
Requirements

Computer Hardware

You need at least three USB receptacles (recommended) on your computer 

to connect it to your SMART Mobile Stand. If your computer has fewer than three 

available USB receptacles, you need a USB hub (not included) to connect 

your computer to your stand.

Local Area Network (LAN) Connection (Optional)

Your SMART Mobile Stand includes a standard RJ45 LAN connection point 

to connect your computer to your network. You need an external source so that 

you can access the Internet.

Determining Your Model of 
SMART Mobile Stand

Your SMART Mobile Stand is either a standard model (FSSBID 100), or one that 

includes support for a SMART Hub SE240 (FSSBID 100H). You can determine your 

model of SMART Mobile Stand by referring to its serial number, which is located on 

the back, right-hand side of your unit’s speaker panel, near the top:

•

If you have model FSSBID 100, the serial number follows the format 

FSSBID1-R2-XXXXX, where X is any number.

•

If you have model FSSBID 100H, the serial number follows the format 

FSSBID1H-R2-XXXXX, where X is any number.