Smart FSSBID 100 Manuale Utente

A S S E M B L I N G   Y O U R   S M A R T   M O B I L E   S T A N D

1010651 Rev C1

Adjusting the Shelves

Your SMART Mobile Stand includes two vertically adjustable shelves. The spacing 

of these shelves ranges from 2" to 19" (5.1 cm to 48.3 cm). Consider whether you plan 

to install a SMART Hub, DVD/Blu-ray player or VCR in your unit when determining 

the best height for these shelves. Typically, you will install your DVD/Blu-ray player on 

the top shelf, and then install your VCR on the bottom shelf.

If you ordered model FSSBID 100H, install your SMART Hub SE240 

(see page 38) in your SMART Mobile Stand before you install the shelves. 

To determine your model of stand, see page 7.

1.

If the shelves are already installed in your SMART Mobile Stand, remove them 

from the cabinet, and then remove the eight shelf clips.

If you need instructions for removing your rear access panels, 

see steps 1 to 3 in Appendix A: Configuring a Rack Mount on page 69 

(or the SMART Mobile Stand for Interactive Displays Textless Installation 

Instructions (

2.

Install four of the included shelf clips at the desired height for the first shelf. 

–

These clips secure to the cabinet’s left and right front rack rails, 

rear support tubing and side wall, as shown in the following illustration.

–

Ensure that you leave at least 1" (2.5 cm) of space above equipment 

for cooling.