Omnitron iConverter GM3 8970P-0-D Manuale Utente
Codici prodotto
8970P-0-D
Page 2
iConverter
GM3
TRAFFIC MANAGEMENT
■ IEEE 802.1Q VLAN tagging and 802.1ad Q-in-Q VLAN
stacking
■ Service Multiplexing of up to 256 EVCs
■ User-configurable EtherType
■ Ingress and Egress traffic management
■ CIR/EIR Color Aware “two rates, three colors” bandwidth
profiles for ingress rate limiting
■ Advanced Flow and CoS classification per Port, VLAN ID,
PCP, IPv4/IPv6 (TOS/DiffServe) Priority, MAC address, IP
address, TCP Port or L2CP
■ Layer 2 Protocol Tunneling (L2PT) to encapsulate STP,
VTP, PVST and CDP protocols (subscriber CISCO
protocols)
■ All ports configurable as UNI or NNI
■ 10,240 byte Jumbo frames
INTERFACES AND REDUNDANCY
■ Available with dual SFP fiber ports for geo-diverse uplink
redundancy (1:1)
■ Supports Rapid Spanning Tree Protocol (RSTP)
■ Port Mirroring
■ Subscriber network service port available in copper
RJ-45 or SFP Fiber interfaces
■ Three-port configuration supports redundant access link
or multi-subscriber applications
■ Supports 1000BASE-X and 100BASE-FX Small Form
Pluggable (SFP) transceivers for standard or CWDM
applications
SERVICE OAM AND TESTING
■ IEEE 802.1ag End-to-End Connectivity Fault
Management (CFM) – with 8 Maintenance Domain levels
and 256 Maintenance Associations
■ Supports 802.1ag Maintenance Intermediate Points
(MIPs) for fault isolation
■ ITU-T Y.1731 End-to-End Performance Monitoring
■ Advanced classification and filtering of Layer 1, 2, 3 or 4
subscriber traffic as a EVC or CoS flow
■ Y.1731 threshold monitoring and threshold crossing alerts
■ IEEE 802.3ah Ethernet Link OAM with dying gasp
■ Zero Touch Provisioning
■ Per-port and per-flow Loopback with MAC swap
■ Compatible with third party in-band loopback testing
■ Built-in UTP cable tester for troubleshooting through to
the Customer Equipment
NETWORK MANAGEMENT
■ Remote management via TELNET, SNMPv1/v2c/v3
■ SNMP management via Omnitron’s NetOutlook Network
Management software
■ IP-less management through 802.3ah OAM extensions
■ Fully integrated with Cyan CyPortal for SLA monitoring
The GM3 is available as a compact standalone unit or as a
chassis plug-in module. The GM3 plug-in module can be
mounted in any iConverter chassis and manage other modules
in the same chassis, and operate as a Network Interface
Device. It features two Gigabit Ethernet backplane ports for
connectivity to adjacent modules in a chassis for multi-port and
multi-service configurations.
The standalone GM3 is available with or without integrated
mounting brackets. It is DC powered and available with an
external AC/DC power adapter, or with a terminal connector
for wiring directly to a DC power source.
The GM3 also functions as a fiber transport module for the
The GM3 also functions as a fiber transport module for the
modular
iConverter
T1/E1 and Ethernet Multiplexer System.