AMX MVP-5150 FG5966-09 Scheda Tecnica
Codici prodotto
FG5966-09
number of the panel.
•Transmits AMX fixed frequencies at 38 kHz and 455
•Transmits AMX fixed frequencies at 38 kHz and 455
kHz and user programmable frequencies from 20 kHz
to 1.5 MHz
to 1.5 MHz
ENVIRONMENTAL
Temperature (Operating)
0° C (32° F) to 40° C (104° F)
Humidity (Operating)
5% to 85% RH
Temperature (Storage)
-20° C (-4° F) to 60° C (140° F)
Humidity (Storage)
5% to 85% RH
GENERAL
Dimensions (HWD)
4 3/4" x 7 9/16" x 13/16" (12.1 cm x 19.2 cm x 2.0 cm)
Weight
1.25 lbs (570 grams)
Power Requirements (Without Charging)
FG5966-07
Panel with battery fully charged or with no battery:
Panel with battery fully charged or with no battery:
•Constant current draw: 0.3 A @ 12 VDC
•Startup current draw: 0.4 A @ 12 VDC
•Startup current draw: 0.4 A @ 12 VDC
FG5966-09
Panel with battery fully charged or with no battery:
•Constant current draw: 0.29 A @ 12 VDC
•Constant current draw: 0.29 A @ 12 VDC
•Startup current draw: 0.37 A @ 12 VDC
Power Requirements (While Charging)
FG5966-07
Panel while charging battery:
Panel while charging battery:
•Constant current draw: 1.1 A @ 12 VDC
•Startup current draw: 1.3 A @ 12 VDC
•Startup current draw: 1.3 A @ 12 VDC
FG5966-09
Panel while charging battery:
•Constant current draw: 1.04 A @ 12 VDC
•Constant current draw: 1.04 A @ 12 VDC
•Startup current draw: 1.07 A @ 12 VDC
Minimum Power Supply Required
•PS3.0 Power Supply (FG423-30) - both 120 VAC and
240 VAC models are shipped with this power supply
Power Modes
•On: All necessary modules are powered up and
device remains online with the NetLinx Master
•Sleep: Only the backlight will be turned off after the
•Sleep: Only the backlight will be turned off after the
user selectable time of inactivity has elapsed. Panel
resumes the ON mode in ~ 1 second upon a
resumes the ON mode in ~ 1 second upon a
momentary press of the touchscreen
•Shutdown: Power to all peripherals and components
•Shutdown: Power to all peripherals and components
is turned off. The system remains in this mode until
either it is rebooted or the battery is completely
either it is rebooted or the battery is completely
drained. The panel is re-activated by pressing the
touchscreen and holding until the AMX splash screen
touchscreen and holding until the AMX splash screen
appears