Sony UNI-ORBC6 Dépliant
IR Illuminator
(Images 1)
Outdoor PoE Powered Vandal
Resistant Fixed Camera Housing
UNI-ORBC6
Security Camera Enclosures
•
Compatible with: SNC-CH110 / 120 / 140 / 210 / 220 and 240.
•
Accommodates wide-angle lenses up to 135º.
•
Meets NEMA type 4X standards.
•
Standard wall / pole mount.
•
Thermostatically controlled heater and blower.
•
IK10 impact rated.
•
PoE with Dynamic Power Allocation (DPA):
- Supports PoE Plus IEEE802.3at which powers the heater, blower, and camera.
- DPA ensures maximum power to the camera in all conditions.
- Automatically adjusts for weather conditions and long cable runs.
•
IP66 rated for superior moisture and dirt ingress protection.
•
Equipped with an adjustable sunshield.
•
The outdoor UNI-ORBC6 with Dynamic Power Allocation (DPA) Technology is designed to keep advanced PoE fixed
cameras operating at peak performance under all weather conditions. Extreme environments especially temperature
pose a major threat to typical PoE camera systems. A typical outdoor PoE camera system splits a fixed amount of power
to the camera and the heater / blower. This does not allow for optimum performance in all weather conditions. With DPA
technology, power is constantly monitored and allocated according to current conditions based on need. Over time
temperature fluctuations can reduce the performance of the camera and lead to premature failures. The UNI-ORBC6
addresses these concerns and helps to ensure the proper amount of power is designated as needed.
pose a major threat to typical PoE camera systems. A typical outdoor PoE camera system splits a fixed amount of power
to the camera and the heater / blower. This does not allow for optimum performance in all weather conditions. With DPA
technology, power is constantly monitored and allocated according to current conditions based on need. Over time
temperature fluctuations can reduce the performance of the camera and lead to premature failures. The UNI-ORBC6
addresses these concerns and helps to ensure the proper amount of power is designated as needed.
•
The UNI-ORBC6 is an IP66 enclosure designed with features such as: a side hinge that allows for easy camera servicing and
setup; a snap-in camera mounting sled for simple and secure camera installation, a strategically placed heater / blower
with channelled air flow to ensure the housing window and camera lens remain clear; and a heavy-duty feed through
wall / pole mount with conduit input for clean installation aesthetics.
with channelled air flow to ensure the housing window and camera lens remain clear; and a heavy-duty feed through
wall / pole mount with conduit input for clean installation aesthetics.
KEY FEATURES
BID SPECIFICATIONS
The UNI-ORBC6 is an outdoor, PoE, vandal
resistant, fixed camera housing. The housing
includes a feed-thru wall / pole mount, adjustable
sunshield and 30 watt PoE midspan.
resistant, fixed camera housing. The housing
includes a feed-thru wall / pole mount, adjustable
sunshield and 30 watt PoE midspan.