ZyXEL 202H 91-003-194003B Manuale Utente
Codici prodotto
91-003-194003B
P-202H Plus v2 User’s Guide
289
Chapter 30 System Maintenance
The following table describes the fields in this menu.
30.3 Time and Date Setting
The Real Time Chip (RTC) keeps track of the time and date. There is also a software
mechanism to set the time manually or get the current time and date from an external server
when you turn on your ZyXEL Device. Menu 24.10 allows you to update the time and date
settings of your ZyXEL Device. The real time is then displayed in the ZyXEL Device error
logs and firewall logs.
mechanism to set the time manually or get the current time and date from an external server
when you turn on your ZyXEL Device. Menu 24.10 allows you to update the time and date
settings of your ZyXEL Device. The real time is then displayed in the ZyXEL Device error
logs and firewall logs.
Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.
Figure 196 Menu 24: System Maintenance
Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the
time and date settings of your ZyXEL Device as shown in the following screen.
time and date settings of your ZyXEL Device as shown in the following screen.
Table 96 Call History Fields
FIELD
DESCRIPTION
Phone Number
This is the telephone number of past incoming and outgoing calls.
Dir
This shows whether the call was incoming or outgoing.
Rate
This is the transfer rate of the call.
#call
This is the number of calls made to or received from that telephone number.
Max
This is the length of time of the longest telephone call.
Min
This is the length of time of the shortest telephone call.
Total
This is the total length of time of all the telephone calls to/from that telephone
number.
You may enter an entry number to delete it or ‘”0” to exit.
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
9. Call Control
10. Time and Date Setting
11. Remote Management Setup
Enter Menu Selection Number: