Zebra HW46211 Manuale Utente

13185L-002 Rev. A  1/24/06

110XiIIIPlus Maintenance Manual

Page 4-109

Maintenance

Section 4

After setting the DIP switches, turn the printer Off (O) and On (l). With the exception of 

DIP switch #2, the printer monitors the positions of the DIP Switches only during the 

Power-On Self Test.

The EBCDIC Buffer Print function is enabled whenever DIP Switch #2 is placed in the 

right position. 

Left

Inhibits the sending of the Intervention Required (IR) status message.

Right

When a printer error condition is monitored by the coax interface for a period of at 
least 10 minutes, an Intervention Required (IR) status message is sent to the 
host.

Left

An Operation Complete status message is sent to the host after a label format is 
completely printed. The host can then send the next label format to be printed.

Right

Enables the Early Print Complete function. The host can send additional print 
jobs to the printer without waiting for the completion of the current print job. The 
printing status sent to the host reflects the label formats received, not the ones 
completed.

Left

Left

3564 Byte buffer 

Left

Left

3440 Byte buffer

Left

Right

1920 Byte buffer

Left

Right

960 Byte buffer

Not Active

Not Active