Zebra HW46211 Manuale Utente

13185L-002 Rev. A 1/24/06

110XiIIIPlus Maintenance Manual

Page 3-5

Troubleshooting

Section 3

Feed Key Self Test

Information on the printed configuration (Cancel Key Self Test) label will be used with the 

results of this self test to determine the best darkness setting for a specific media/ribbon 

combination.

The Feed Key Self Test label (shown in 

) prints out at various positive and 

negative darkness settings relative to the darkness value shown on the configuration label. 

Inspect these labels and determine which one has the best darkness setting for the 

application. This value can be entered into the printer by configuring the Darkness 

Parameter.

The value printed on the selected test label is added to or subtracted from the darkness 

value specified on the configuration label.

The resulting numeric value (0 to 30) that is best for that specific media/ribbon 

combination should be entered as the Darkness Parameter.

Note • The Cancel Key Self Test should be performed prior to this self test.

Note • The 110XiIIIPlus darkness value adjusts in 0.1 increments.