Cisco VIC 1225T 2-Port 10GBaseT CNA UCSC-PCIE-C10T-02= Manuale Utente

Video

The Emulex Pilot 3 Integrated Baseboard Management Controller provides video:

■

Matrox G200e video controller

■

Integrated 2D graphics core with hardware acceleration

■

Supports all display resolutions up to 1920 x 1200 x 16 bpp resolution at 60 Hz

■

24-bit color depth for all resolutions less than 1600x1200 

■

256 MB video memory

Interfaces 

Rear panel

■

One RJ-45 10/100/1000 Ethernet management port, using Cisco Integrated 

Management Controller (CIMC) firmware

■

Four 1-GbE (10/100/1000 Mbps capable) LOM ports

■

One RJ45 serial port connector

■

Two USB 2.0 port connectors

■

One DB15 VGA connector

■

Various PCIe card ports (dependent on which cards are installed)

• Converged Network Adapter (CNA) ports
• Network Interface Card (NIC) ports
• Host Bus Adapter (HBA) ports

Front panel

■

One KVM console connector (supplies two USB 2.0, one VGA, and one serial 

connector)

WoL

The 1-Gb Base-T Ethernet LAN ports support the wake-on-LAN (WoL) standard.

InfiniBand

The bus slots in this server support the InfiniBand architecture.

Front Panel

■

A front panel controller provides status indications and control buttons

Power subsystem 

One power supply is required (either 650 W or 1200 W AC, or 930 W DC). An 

additional power supply may be ordered to provide 1+1 redundancy. The power 

supplies must match in a redundant power supply configuration.

ACPI

This server supports the advanced configuration and power interface (ACPI) 4.0 

standard.

Fans 

Chassis:

■

Six hot-swappable fans for front-to-rear cooling

Power supply:

■

Each power supply is equipped with a fan.

Integrated 

management 

processor 

BMC running Cisco Integrated Management Controller (CIMC) firmware.
Depending on your CIMC settings, the CIMC can be accessed through the 1-GbE 

dedicated management port, the 1-GbE LOM ports, or a Cisco virtual interface 

card (VIC).