Cradlepoint 170605-000 Manuale Utente
Ninety day limited hardware warranty only available in the US and Canada. Product specifications are subject to change without notice. © 2013 CradlePoint,
Inc. All rights reserved. CradlePoint, WiPipe™, and the WiPipe logo are trademarks of CradlePoint, Inc. in the US and other countries. Other trademarks are the
property of their respective owners.
property of their respective owners.
cradlepoint.com
700 MHz - 2700 MHz Wide Band Directional Antenna (Yagi/Log-Periodic)
How It Works
CradlePoint’s Wide Band Directional Antenna (Log-Periodic) will collect the cell tower signal and send it through the cable to the
integrated or embedded CradlePoint modem and router. When the modem transmits, the signal is transferred directly to the
antenna and broadcasted back to the cell tower.
Thank you for purchasing a CradlePoint Antenna
Please read all instructions before installing your antenna, and check the parts supplied against those listed in this guide.
CradlePoint’s weather resistant, encased antenna is wide band log periodic directional and ideal for many exterior building
CradlePoint’s weather resistant, encased antenna is wide band log periodic directional and ideal for many exterior building
locations, such as homes, offices, stores and warehouses.
The innovative design results in high efficiency and low signal loss, which means more signal to your router’s modem. This multi-
band, high-performance, directional antenna supports multiple frequencies (Specifications below). It is backed by CradlePoint’s
30-day money-back guarantee and 1-year limited warranty.
30-day money-back guarantee and 1-year limited warranty.
Package Contents
(A) Wide Band Log Periodic Directional Antenna & L Bracket
(B) 2 - U-Bolts
(C) 2 - Pipe Brackets
(D) 4 - 1/4” Washers
(E) 4 - 1/4” Split-Lock Washers
(F) 4 - 1/4”-20 nuts.
(B) 2 - U-Bolts
(C) 2 - Pipe Brackets
(D) 4 - 1/4” Washers
(E) 4 - 1/4” Split-Lock Washers
(F) 4 - 1/4”-20 nuts.
Antenna Mounting Instructions
1 –
Install
U-Bolt (B) on pole.
2 – Slide Pipe Clamp
(C)
over U-Bolt
(B)
Flat side away from pipe.
3 – Slide antenna bracket
(A)
onto U-Bolt
(B)
in desired location.
Note:
Antenna may be installed on a variety of pipe angles,
insure antenna is pointing at cell tower and is vertical with
the drip hole at the bottom.
4 – Install Flat washer
(D)
, split lock washer
(E)
and nut
(F)
, tighten as
appropriate.
Note:
A second U-Bolt assembly has been included to
strengthen antenna mounting in windy areas repeat steps 1
thru 4 to install.