Bosch ISW-BGB1-SAX F.01U.027.316 Manuale Utente
Codici prodotto
F.01U.027.316
Region
Certification
Europe
CE
1999/5/EC, IEC60950-1: 2001,
EN60950-1:2001 +A11:2004,
EN50130-4: 1996 +A1: 1998 +A2:
2003, EN61000-4-2: 1995 +A1: 1998
+A2: 2001, EN61000-4-3: 2002 +A1:
2003 +A2: 2005, EN61000-4-4: 1995
+A1: 2001 +A2: 2001, EN61000-4-5:
1995 +A1: 2001, EN61000-4-6: 1996
+A1: 2001 +A2: 2001 +A3: 2005,
EN61000-4-11: 1994 +A1: 2001,
EN55022/ANSI C63.4: 2003, ETSI EN
300 220-1 V1.3.1: 2000-09, ETSI EN
301 489-1 V1.4.1: 2002-08, ETSI EN
301 489-3 V1.4.1: 2002-08
Installation/Configuration Notes
Notice
Glassbreak detectors are intended only as a com-
ponent of a perimeter protection system. They
should always be used in conjunction with motion
sensors.
Glassbreak detectors are intended only as a com-
ponent of a perimeter protection system. They
should always be used in conjunction with motion
sensors.
Compatibility Information
The wireless Local SecurityNetwork (wLSN) including
the wLSN Glassbreak Detector is compatible with the
Easy Series Control Panel.
the wLSN Glassbreak Detector is compatible with the
Easy Series Control Panel.
Acoustic Capabilities
The wLSN Glassbreak Detector can be used with the
following glass types:
following glass types:
Glass Type
Glass Thickness
Plate
2.4 mm to 9.5 mm (0.09 in. to 0.38 in.)
Tempered
3.2 mm to 9.5 mm (0.13 in. to 0.38 in.)
Laminated*
3.2 mm to 14.3 mm (0.13 in. to 0.56 in.)
Wired
6.4 mm (0.25 in.)
* Protected only if both panes of unit are broken
Mounting Considerations
Mount the detector on interior walls or ceilings where
it is protected from weather elements such as rain or
snow. For the best performance, mount the detector
within clear view of the glass (there is no minimum
range) and within 7.6 m (25 ft) of the glass.
it is protected from weather elements such as rain or
snow. For the best performance, mount the detector
within clear view of the glass (there is no minimum
range) and within 7.6 m (25 ft) of the glass.
Notice
If the window is covered with heavy drapes, cur-
tains, shades, blinds, and so on, mount the detec-
tor on the window frame.
If the window is covered with heavy drapes, cur-
tains, shades, blinds, and so on, mount the detec-
tor on the window frame.
Do not mount the detector:
• In a corner
• In rooms with loud equipment such as air compres-
• In rooms with loud equipment such as air compres-
sors, bells, and power tools.
• On the same wall as the glass.
• On freestanding posts or pillars.
• On freestanding posts or pillars.
Notice
Installation on metal surfaces can affect the RF
propagation pattern of the radio transceiver.
propagation pattern of the radio transceiver.
The RF transceiver has a range of approximately
1000 m (3000 ft) in open air. However, in normal oper-
ation, the actual RF range depends on building con-
struction.
1000 m (3000 ft) in open air. However, in normal oper-
ation, the actual RF range depends on building con-
struction.
Parts Included
Quant.
Component
1
Glassbreak detector
2
AA batteries (P/N: 16556)
1
Hardware pack
1
Literature pack
Technical Specifications
Environmental Considerations
Environment:
Indoor, dry
Relative Humidity:
Up to 95%, non-condensing
Temperature (operating):
-10°C to +55°C (+14°F to +131°F)
Mechanical Properties
Color:
Off-white
Dimensions (H x W x D):
11.6 cm x 4.5 cm x 2.8 cm
(4.6 in. x 4.2 in. x 1.25 in.)
Power Requirements
Battery Power
Battery Life:
1-1.5 years under normal operating condi-
tions
Battery Requirements:
Two AA Alkaline batteries
Recommended
Replacements:
Duracell® MN1500 or PC1500, Everea-
dy® E91, Panasonic® AM-3PIX/B
Transmission and Reception Characteristics
Frequency:
European Security Band
868 MHz to 869 MHz
Range (open field):
1000 m (3000 ft)
Trademarks
Duracell® is a registered trademark of the Gillette Company, USA, in the
United States and/or other countries.
Eveready® is a registered trademark of Eveready Battery Company, Inc.
Panasonic® is a registered trademark of a Matsushita Electric Industrial
Co., Ltd.
2 | wLSN Glassbreak Detector