IBM Flex System V7000 Expansion Enclosure 4939H29 Manuale Utente
Codici prodotto
4939H29
Chapter 6. Basic Volume and Host Configuration
253
Draft Document for Review January 29, 2013 12:52 pm
8068ch06-Volumes.fm
Figure 6-17 Thin Mirror - Enter volume name and size
4. The summary shows you the capacity information and the allocated space. You can click
Advanced and customize the thin-provision settings (Figure 6-8 on page 247) or the
mirror synchronization rate (Figure 6-13 on page 250). If you have opened the advanced
settings, click OK to return to Figure 6-17.
mirror synchronization rate (Figure 6-13 on page 250). If you have opened the advanced
settings, click OK to return to Figure 6-17.
5. Click Create and the mirrored volume is created (Figure 6-18).
Figure 6-18 Thin Mirror volume creates - CLI command displays
6. After the task is completed, click Close
You can choose to map the new volumes immediately as part of the volume create wizard by
clicking Create and Map to Host. This will guide you through the Map to Host wizard
described in section 6.3, “Mapping a volume to the host” on page 261.
clicking Create and Map to Host. This will guide you through the Map to Host wizard
described in section 6.3, “Mapping a volume to the host” on page 261.