ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Manuale Utente

P-202H Plus v2 User’s Guide

Chapter 17 Menu 2 ISDN Setup

176

The following table describes the fields in this menu.

Table 59   Menu 2.2 NetCAPI Setup

Active

This field allows you to enable or disable NetCAPI. Press the [SPACEBAR] to 

select Yes or No.

Max Number of 

Registered Users

When you want to use NetCAPI to place outgoing calls or to listen to incoming 

calls, you must start RVSCOM on your computer, and RVSCOM will register itself 

to the ZyXEL Device. This option is the maximum number of clients that the 

ZyXEL Device supports at the same time.

Incoming Data Call 

Number Matching

This field determines how incoming calls are routed. Select NetCAPI if you want 

to direct all incoming data calls to NetCAPI. Select Subscriber Number (MSN) if 

you want to direct all incoming call to the ZyXEL Device only when the incoming 

phone number matches the ISDN DATA number. If the incoming phone number 

does not match the ISDN DATA number, then the call will be routed to NetCAPI. 

Select Called Party Subaddress if you want to direct all incoming calls to the 

ZyXEL Device only when the incoming call matches the subaddress of ISDN 

DATA. If the incoming call does not match the subaddress of ISDN DATA, then the 

call will be routed to NetCAPI.

Access List:

Start IP

Refers to the first IP address of a group of NetCAPI clients. Each group contains 

contiguous IP addresses.

End IP

Refers to the last IP address in a NetCAPI client group.

Operation

Select Incoming if you wish to grant incoming calls permission. Select Outgoing 

if you wish to grant outgoing calls permission. Select Both if you wish to grant 

both incoming calls and outgoing calls permissions. Select None if you wish to 

deny all calls.

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to 

save your configuration, or press [ESC] at any time to cancel.