ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Manuale Utente

P-202H Plus v2 User’s Guide

181

Chapter 18 Menu 3 Ethernet Setup

Figure 85   Physical Network & Partitioned Logical Networks

You must use menu 3.2 to configure the first network. Move the cursor to the Edit IP Alias field, press 
[SPACE BAR] to choose Yes and press [ENTER] to configure the second and third network.

Press [ENTER] to open Menu 3.2.1 - IP Alias Setup, as shown next.

Figure 86   Menu 3.2.1 IP Alias Setup

Use the instructions in the following table to configure IP alias parameters.

             Menu 3.2.1 - IP Alias Setup

             IP Alias 1= Yes
               IP Address=
               IP Subnet Mask= 0.0.0.0
               RIP Direction= None
                  Version= RIP-1
               Incoming protocol filters=
               Outgoing protocol filters=
             IP Alias 2= No
               IP Address= N/A
               IP Subnet Mask= N/A
               RIP Direction= N/A
                  Version= N/A
               Incoming protocol filters= N/A
               Outgoing protocol filters= N/A

                  Enter here to CONFIRM or ESC to CANCEL:

Table 62   Menu 3.2.1 IP Alias Setup

IP Alias 1, 2

Choose Yes to configure the LAN network for the ZyXEL Device.

IP Address

Enter the IP address of your ZyXEL Device in dotted decimal notation.

IP Subnet Mask

Your ZyXEL Device will automatically calculate the subnet mask based on the IP 

address that you assign. Unless you are implementing subnetting, use the subnet 

mask computed by the ZyXEL Device.

RIP Direction

Press [SPACE BAR] and then [ENTER] to select the RIP direction. Options are 

Both, In Only, Out Only or None.

Version

Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are RIP-

1, RIP-2B or RIP-2M.