ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Manuale Utente
Codici prodotto
91-003-154001B
P-202H Plus v2 User’s Guide
209
Chapter 22 Dial-in Setup
Figure 103 Edit Dial-in-User Example
Note: The caller always controls Idle Timeout, so this field does not apply when there
is callback.
22.7 LAN-to-LAN Server Application Example
Your ZyXEL Device can also be used as a dial-in server for LAN-to-LAN application to
provide access for the workstations on a remote network. For your ZyXEL Device to be set up
as a LAN-to-LAN server, you need to configure the default dial-in user setup to set the
operational parameters for incoming calls. Additionally, you must create a remote node for the
router on the remote network (see the chapter on remote node configuration). An example of
your ZyXEL Device being used as a LAN-to-LAN server is shown as follows.
provide access for the workstations on a remote network. For your ZyXEL Device to be set up
as a LAN-to-LAN server, you need to configure the default dial-in user setup to set the
operational parameters for incoming calls. Additionally, you must create a remote node for the
router on the remote network (see the chapter on remote node configuration). An example of
your ZyXEL Device being used as a LAN-to-LAN server is shown as follows.
Figure 104 Example of a LAN-to-LAN Server Application
22.7.1 Configuring Callback in LAN-to-LAN Application
In this scenario, LAN 1 first calls LAN 2, then LAN 2 calls back to LAN 1. These are the
respective SMT menus.
respective SMT menus.
Menu 14.1 - Edit Dial-in User
User Name= name
Active= Yes
Password= ********
Callback= No
Phone # Supplied by Caller= N/A
Callback Phone #= N/A
Rem CLID=
Idle Timeout= 100
Active= Yes
Password= ********
Callback= No
Phone # Supplied by Caller= N/A
Callback Phone #= N/A
Rem CLID=
Idle Timeout= 100
Press ENTER to Confirm or ESC to Cancel: