ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Manuale Utente

Codici prodotto
91-003-154001B
Pagina di 375
P-202H Plus v2 User’s Guide
327
Appendix C Log Descriptions
 
 
readNetBIOSFilter: calloc 
error
The router failed to allocate memory for the NetBIOS filter settings.
WAN connection is down.
A WAN connection is down. You cannot access the network 
through this interface.
Table 118   Access Control Logs
LOG MESSAGE
DESCRIPTION
Firewall default policy: [TCP | 
UDP | IGMP | ESP | GRE | OSPF] 
<Packet Direction>
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access 
matched the default policy and was blocked or forwarded 
according to the default policy’s setting.
Firewall rule [NOT] match:[TCP | 
UDP | IGMP | ESP | GRE | OSPF] 
<Packet Direction>, <rule:%d>
Attempted TCP/UDP/IGMP/ESP/GRE/OSPF access 
matched (or did not match) a configured firewall rule 
(denoted by its number) and was blocked or forwarded 
according to the rule. 
Triangle route packet forwarded: 
[TCP | UDP | IGMP | ESP | GRE | 
OSPF]
The firewall allowed a triangle route session to pass 
through.
Packet without a NAT table entry 
blocked: [TCP | UDP | IGMP | ESP 
| GRE | OSPF]
The router blocked a packet that didn't have a 
corresponding NAT table entry.
Router sent blocked web site 
message: TCP
The router sent a message to notify a user that the router 
blocked access to a web site that the user requested.
Table 119   TCP Reset Logs
LOG MESSAGE
DESCRIPTION
Under SYN flood attack, 
sent TCP RST
The router sent a TCP reset packet when a host was under a SYN 
flood attack (the TCP incomplete count is per destination host.) 
Exceed TCP MAX 
incomplete, sent TCP RST
The router sent a TCP reset packet when the number of TCP 
incomplete connections exceeded the user configured threshold. 
(the TCP incomplete count is per destination host.) Note: Refer to 
TCP Maximum Incomplete in the Firewall Attack Alerts screen. 
Peer TCP state out of 
order, sent TCP RST
The router sent a TCP reset packet when a TCP connection state 
was out of order.Note: The firewall refers to RFC793 Figure 6 to 
check the TCP state.
Table 117   System Error Logs (continued)
LOG MESSAGE
DESCRIPTION