ZyXEL Prestige 202H Plus ISDN Router 91-003-154001B Manuale Utente
Codici prodotto
91-003-154001B
P-202H Plus v2 User’s Guide
161
Chapter 15 Introducing the SMT
15.5 Navigating the SMT Interface
The SMT(System Management Terminal) is the interface that you use to configure your
ZyXEL Device.
ZyXEL Device.
Several operations that you should be familiar with before you attempt to modify the
configuration are listed in the table below.
configuration are listed in the table below.
27 VPN/IPSec Setup
27.1 IPSec Summary
27.1.1 IPSec Setup
27.1.1.1 IKE Setup
27.1.1.2 Manual
Setup
27.2 SA Monitor
27.3 View IPSec Log
Table 52 SMT Menus Overview (continued)
MENUS
SUB MENUS
Table 53 Main Menu Commands
OPERATION
KEYSTROKE
DESCRIPTION
Move down to
another menu
[ENTER]
To move forward to a submenu, type in the number of the
desired submenu and press [ENTER].
Move up to a
previous menu
[ESC]
Press [ESC] to move back to the previous menu.
Move to a “hidden”
menu
Press [SPACE
BAR] to change No
to Yes then press
[ENTER].
Fields beginning with “Edit” lead to hidden menus and have
a default setting of No. Press [SPACE BAR] once to change
No to Yes, and then press [ENTER] to go to the “hidden”
menu.
Move the cursor
[ENTER] or [UP]/
[DOWN] arrow
keys.
Within a menu, press [ENTER] to move to the next field. You
can also use the [UP]/[DOWN] arrow keys to move to the
previous and the next field, respectively.
When you are at the top of a menu, press the [UP] arrow key
When you are at the top of a menu, press the [UP] arrow key
to move to the bottom of a menu.
Entering
information
Type in or press
[SPACE BAR], then
press [ENTER].
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you
to cycle through the available choices by pressing [SPACE
BAR].
Required fields
<
?
> or ChangeMe All fields with the symbol <?> must be filled in order to be
able to save the new configuration.
All fields with ChangeMe must not be left blank in order to
All fields with ChangeMe must not be left blank in order to
be able to save the new configuration.
N/A fields
<N/A>
Some of the fields in the SMT will show a <N/A>. This
symbol refers to an option that is Not Applicable.