Gamber-Johnson 7170-0132 Dépliant
3
4
Solution Components:
1. Leg Kit
(Item No. 7160-0301)
Leg Kit is a no-drill solution and attaches to the seat
studs.
Leg Kit is a no-drill solution and attaches to the seat
studs.
2. 29” Top Plate
(Item No. 7160-0085)
Top plate allows console box to be off set towards
the passenger for added space .
Top plate allows console box to be off set towards
the passenger for added space .
3. 13” Console Box
(Item No. MCS-EPIC13)
The two-piece fl exible design allows for multiple
height/angle combinations based on radio
requirements.
The two-piece fl exible design allows for multiple
height/angle combinations based on radio
requirements.
Console box comes with standard
faceplates and fi ller panels (full faceplates must be
ordered separately).
4. Side Extension Mounting Plate
(Item No. 7160-0106)
Provides off -set mounting surface
Provides off -set mounting surface
5. Pole System
(Item No. DS-LOWER-9 & 7160-0178)
Pole system includes the lower tube and the center
upper pole. Combined they allow the user to
ergonomically position the computer to fi t them
best.
Pole system includes the lower tube and the center
upper pole. Combined they allow the user to
ergonomically position the computer to fi t them
best.
6. 9” Locking Slide Arm - Mongoose
(Item No. 7160-0220)
Locking Slide Arm can rotate around 360°
with locking points every 15°. Slide Arm can
extend out from 9” to 13” from center pole and
locks automatically in the retracted 9” position.
Motion Attachment has tilt capabilities up to 90°
forward/30° backward and can be swiveled up to
360°.
Locking Slide Arm can rotate around 360°
with locking points every 15°. Slide Arm can
extend out from 9” to 13” from center pole and
locks automatically in the retracted 9” position.
Motion Attachment has tilt capabilities up to 90°
forward/30° backward and can be swiveled up to
360°.
7. Support Brace
(Item No. 7160-0230)
Support Brace provides additional mount system
support in rugged driving conditions and reduces
mounting system vibration.
Support Brace provides additional mount system
support in rugged driving conditions and reduces
mounting system vibration.
8. Armrest
(Item No. MCS-ARMREST)
The Armrest is height adjustable for better
ergonomic positioning. The padded armrest fl ips
up to allow access to the console box or cupholder
if needed.
The Armrest is height adjustable for better
ergonomic positioning. The padded armrest fl ips
up to allow access to the console box or cupholder
if needed.
9. Accessories
(Item No. MCS-CUPHOLD2)
The cupholder mounts to the front of the console
box. It holds two cups and is compatible with most
cup sizes
The cupholder mounts to the front of the console
box. It holds two cups and is compatible with most
cup sizes
Rugged Dock
ing Sta
tions and
V
ehicle Moun
ts
This document, including images, may not be reproduced partly or
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
fully without the expressed written consent of Gamber-Johnson’s
Marketing Department. © Copyright 2013 Gamber-Johnson, LLC
Console System
1
2
5
6
7
8
Vehicle Solution Package:
Ford F-250 to F-750 Super Duty
Automatics Only (2011-2013)
Ford F-250 to F-750 Super Duty
Automatics Only (2011-2013)
3001 Borham Ave, Stevens Point, WI 54481
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: gamberj@gamberjohnson.com
Website: www.gamberjohnson.com
Toll Free: 800-456-6868 Fax: 800-934-3577
Email: gamberj@gamberjohnson.com
Website: www.gamberjohnson.com
Item No. 7170-0132
Must order package as is. There are no substitutions.
9