ABUS Xevox BW8070 Dépliant
Codici prodotto
BW8070
Xevox Pet motion detector
Art. no. BW8070
• One PIR element
• A dog under 30kg does not trigger an alarm
• Detection range: 12 x 12m
• Aperture angle: 90°, ideal for corner mounting
• A dog under 30kg does not trigger an alarm
• Detection range: 12 x 12m
• Aperture angle: 90°, ideal for corner mounting
The Xevox Pet motion detector is a motion sensor with one PIR sensor. It reacts to heat movement and reports it
to the alarm center. The Xevox Pet motion detector is an animal-immune motion sensor. That means that it can
tell the difference between persons and small animals such as pets. Whereas persons moving in the room are
reliably detected, the sensor ignores pets up to 30kg in its monitoring. Despite the words "pet immune to 30 kg"
it is possible that animals with a lower weight trigger the detector. The risk of false triggering is particularly high
when the animal moves, jumps, or flies in the vicinity of the detector. The best place to install the equipment is
in a corner, between 2.4 and 2.7 meters above the floor. The intruder's possible direction of movement should be
at right-angles to the sensor. Unsuitable for installation are all places opposite to sources of heat (e.g.: heating)
or a window (sunshine). Do not install the motion sensor near to electric cables, gas lines, or electronic
equipment that generate heat during long periods of operation. The viewing angle of Xevox Pet motion detector
sensors is 90 degrees, and the detection range – depending on installation height – up to 12 x 12 meters. You
can vary their sensitivity by means of a jumper. In this way, you can define the number of pulses that have to be
detected before the sensor opens the alarm relay.
to the alarm center. The Xevox Pet motion detector is an animal-immune motion sensor. That means that it can
tell the difference between persons and small animals such as pets. Whereas persons moving in the room are
reliably detected, the sensor ignores pets up to 30kg in its monitoring. Despite the words "pet immune to 30 kg"
it is possible that animals with a lower weight trigger the detector. The risk of false triggering is particularly high
when the animal moves, jumps, or flies in the vicinity of the detector. The best place to install the equipment is
in a corner, between 2.4 and 2.7 meters above the floor. The intruder's possible direction of movement should be
at right-angles to the sensor. Unsuitable for installation are all places opposite to sources of heat (e.g.: heating)
or a window (sunshine). Do not install the motion sensor near to electric cables, gas lines, or electronic
equipment that generate heat during long periods of operation. The viewing angle of Xevox Pet motion detector
sensors is 90 degrees, and the detection range – depending on installation height – up to 12 x 12 meters. You
can vary their sensitivity by means of a jumper. In this way, you can define the number of pulses that have to be
detected before the sensor opens the alarm relay.
Page 1 of 2
Technical alterations reserved. Misprints and errors excepted. Copyright. © ABUS 07/2013