Panasonic PT-RZ370U PTRZ370U Manuale Utente
Codici prodotto
PTRZ370U
S
P
E
C
F
I
L
E
PT-RZ370
DLP
™
Projectors
As of December 2012
SFD12M011-1
1 1 / 1 1
Notes on projector placement and operation
Please observe the following precautions for projector placement and operation.
1.
Never place objects on top of the projector while it is operating.
2.
Make sure there is an unobstructed space of 500 mm (1 feet 8 inches) or more around the projec-
tor’s exhaust openings.
tor’s exhaust openings.
3.
Do not stack projector units directly on top of one another for the purpose of multiple (stacked)
projection. When stacking projector units, be sure to provide the amount of space indicated below
between them. These space requirements also apply to installations where only one projector unit
is operating at one time and the other unit is used as a backup.
projection. When stacking projector units, be sure to provide the amount of space indicated below
between them. These space requirements also apply to installations where only one projector unit
is operating at one time and the other unit is used as a backup.
4.
Make sure that nothing blocks the projector’s air intake and exhaust openings. Also, install the pro-
jector so that cool or hot air from other air conditioning equipment does not flow directly toward
the projector’s air intake or exhaust openings.
jector so that cool or hot air from other air conditioning equipment does not flow directly toward
the projector’s air intake or exhaust openings.
5.
Do not install the projector in an enclosed space. If it is necessary to install it in an enclosed
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
space, add a separate ventilation system. If ventilation is insufficient, hot air will accumulate at the
intake opening. This may cause the projector’s protective circuit to interrupt projector operation.
6.
If the projector is placed in a box, ensure that the projector’s intake and exhaust openings are not
blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into
the intake openings.
blocked. Take particular care to ensure that hot air from the exhaust openings is not sucked into
the intake openings.
7.
To install and use the projector via a method that does not use the adjustable feet in a floor stand-
ing installation, fix the projector using the four screw holes for ceiling mounting. (Screw diameter:
M4, tapping depth inside the set: 7 mm, torque: 1.25 ± 0.2 N·m)
ing installation, fix the projector using the four screw holes for ceiling mounting. (Screw diameter:
M4, tapping depth inside the set: 7 mm, torque: 1.25 ± 0.2 N·m)
500 mm (1 f t 8 in )
or more
or more
500 mm (1 f t 8 in )
or more
or more
500 mm (1 f t 8 in )
or more
or more
Do not stack projector
units directly on top of
one another.
units directly on top of
one another.
100 mm
( 3 -15 /16 in )
or more
( 3 -15 /16 in )
or more
Direction of air intake and exhaust
Intake
Exhaust
Weights and dimensions shown are approximate. Specifications and appearance are subject to change without notice.
Product availability differs depending on region and country. This product may be subject to export control regulations.
Product availability differs depending on region and country. This product may be subject to export control regulations.
DLP and the DLP logo are trademarks of Texas Instruments.
PJLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions.
All other trademarks are the property of their respective trademark owners.
PJLink is a registered trademark, or a trademark application has been filed, in Japan, the United States, and other countries and regions.
All other trademarks are the property of their respective trademark owners.