LevelOne 8 x 802.3af PoE + 2 GE SFP Managed Switch -40 ~ 75C, DIN-rail IES-1083-v1 Dépliant
Codici prodotto
IES-1083-v1
Overview
LevelOne IES-1083 Industry Ethernet Switch provides 8 PoE ports of
10/100Base-TX plus 2 1000Base SFP slots to enable high speed network
at mission-critical environment. This device is designed to be mounted
on an industry standard DIN-rail, plus the clearly visible status LEDs
provide simple monitoring of port link activity. Moreover, the SFP slots
support pluggable modules that enabling you to choose from a variety
of transceivers.
High Reliability
All components are built to withstand harsh environment applications
without compromise where humidity, temperature variation and even
shock vibration are concerns, including Electric & Utility, Critical
Infrastructure, Transportation and Surveillance Security. This device
operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature.
Features
- Supports PoE Power Sourcing Equipment (PSE)
- PoE control and scheduling
- Supports α-ring and RSTP/MSTP/STP for Ethernet redundancy
- IP Multicast Filtering through IGMP Snooping V1, V2 & V3
- Supports port-based VLAN and IEEE802.1Q VLAN Tagging and GVRP
- IEEE802.1p QoS with four priority queues
- MAC-based trunking with automatic link fail-over
- RS-232 console, Telnet, SNMP V1, V2c & V3, RMON, Web Browser, and
TFTP Management
- Supports Command Line Interface in RS-232 Console
- Supports IEEE802.1x Security
- Bandwidth Rate Control
- Per-port programmable MAC address locking
- Up to 24 Static Secure MAC addresses per port
- Port mirroring
- NTP synchronization
- 1000Mbps-Full-duplex, 10/100Mbps-Full/Half-duplex,
Auto-Negotiation, Auto-MDI/MDIX
- Full wire-speed forwarding rate
- -40°C to 75°C (-40°F to 167°F) operating temperature range, tested for
functional operation @ -40°C to 85°C (-40°F to 185°F)
Resilient Ring Network
Supports Ring topology network providing simple installation and ultra
fast network recovery performance, less than 15ms. Unlike much
complex resilient topology, such as a redundant star, the Ring simplifies
the network design and requires less cabling installation. In addition,
fast network recovery time helps minimize system downtime.
Management
IES-1083 supports a variety of management features including: CLI via
Console or Telnet; Graphic User Interface via Web Browser or Simple
Network Management Protocol via SNMP tools. It provides better
visibility and management of those critical assets.
Power over Ethernet
This switch is Power Sourcing Equipment (PSE), and it is fully complied
with IEEE 802.3af PoE standard at maximum 15.4W power budget per
port. It helps to save infrastructure wiring costs dramatically by
eliminating electric wiring and less UPS needed.
Safety
This device has been tested under UL508 standard for Industrial Control
Equipment to endurance under test turn on and off 6,000 times while
loaded, with no single failure. It’s highly reliability and safety
measurement to ensure field hardened, especially for the harsh
environment.
IES-1083
Diagrams
8 x 802.3af + 2 GE SFP Managed Switch -40 to 75C, DIN-rail
Unit: mm
Side
Buttom
Top
Front
P
o
w
e
r
1
P
o
w
e
r
2
P
o
w
e
r
3
Res
et
+
+
71.4
140
17
0
- Supports IEEE 802.3ad Link Aggregation