CyberData Systems SIP-enabled IP V2 011098B Manuale Utente
Codici prodotto
011098B
VoIP V2 Ceiling Speaker
CyberData Corporation
3 Justin Court, Monterey, CA 93940
831.373.2601
Fax: 831.373.4193
www.cyberdata.net
CyberData Corporation
3 Justin Court, Monterey, CA 93940
831.373.2601
Fax: 831.373.4193
www.cyberdata.net
VoIP V2 Ceiling Speaker
Features
SIP (RFC 3261) compatible
Simultaneous SIP and multicast
Web-based configuration
Paging prioritization
Web-based firmware upgradeable
Plenum-rated enclosure
Autoprovisioning
High efficiency speaker driver
PoE 802.3af Enabled (Powered-over-Ethernet)
DTMF-controlled relay
Line-out connection
Network and manual speaker volume control
Can drive one external analog speaker for greater coverage
User-uploadable ring and alert tones
The CyberData SiP-enabled V2 Ceiling Speaker is a
Power-over-Ethernet (PoE 802.3af) and Voice-over-IP
(VoIP) public address loudspeaker that easily connects
into existing local area networks with a single CAT5 cable
connection. The speaker is compatible with most
SiP-based IP PBX. In a non-SiP environment, the speaker
is capable of playing audio from a multicast source. Its
small footprint and low height allows the speaker to be
discreetly mounted almost anywhere.
Power-over-Ethernet (PoE 802.3af) and Voice-over-IP
(VoIP) public address loudspeaker that easily connects
into existing local area networks with a single CAT5 cable
connection. The speaker is compatible with most
SiP-based IP PBX. In a non-SiP environment, the speaker
is capable of playing audio from a multicast source. Its
small footprint and low height allows the speaker to be
discreetly mounted almost anywhere.
Ringer Mode
The VoIP V2 Ceiling Speaker supports two SIP
extensions. One extension can be assigned to a
page group for auto answer paging. The second
extension can be assigned to a “First-to-Answer” ring
group with IP phones. An audio ring file is activated
when the second SIP extension of the ceiling
speaker is dialed. If any of the IP phones in the ring
group is answered (or if the caller hangs up), the
Ceiling Speaker stops ringing.
The VoIP V2 Ceiling Speaker supports two SIP
extensions. One extension can be assigned to a
page group for auto answer paging. The second
extension can be assigned to a “First-to-Answer” ring
group with IP phones. An audio ring file is activated
when the second SIP extension of the ceiling
speaker is dialed. If any of the IP phones in the ring
group is answered (or if the caller hangs up), the
Ceiling Speaker stops ringing.
Ethernet I/F
10/100 Mbps
Dimensions
9” x 2.4”
Output
10 Watts Peak Power
Sensitivity
96dB / 1W / 1M S.P. Level
Specifications
Power Input
PoE 802.3af
Regulatory Compliance
FCC Class A, UL 60950
Protocol
SIP RFC 3261 Compatible
G711, A-law and µ-law
Payload Types
-30 to 55 C (-22 to 131 F)
Operating Temperature
2 years limited
Warranty
Part Number
Boxed Weight
4.0 lbs
011098*, Standard Color, RAL 9002, Gray White
011099, Optional Color, RAL 9003, Signal White
*This number replaces the 011021 V2 Speaker number.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
831.373.2601
Fax: 831.373.4193
www.cyberdata.net
The IP Endpoint Company
The IP Endpoint Company