Cisco 2-port 10/100 Ethernet with 2 WAN Card Slot Network Module NM-2FE2W-V2= Scheda Tecnica
Codici prodotto
NM-2FE2W-V2=
All contents are Copyright © 1992–2005 Cisco Systems, Inc. All rights reserved. Important Notices and Privacy Statement.
Page 1 of 5
Data Sheet
Cisco Ethernet/Token Ring
Mixed Media Network Modules
Mixed Media Network Modules
The NM-1FE2W, NM-2FE2W, NM-2W, NM-1FE1R2W, NM-1FE2W-V2 and NM-2FE2W-V2 WAN Interface Card carrier modules
allow customers using Cisco 2600, 3600, 3700 and 3800 Series Routers to benefit from the increased performance and
density capabilities delivered by this family of network modules. Features include auto-sensing 10/100 Mbps Fast Ethernet
ports and TDM capabilities.
Figure 1. 10/100 LAN/WAN Combo Network Modules
INTRODUCTION
Table 1.
Four different network modules are available to increase LAN/WAN densities for the Cisco 2600, 2691, 3600, 3700 and
3800 series of multi-service and Integrated Services routers.
3800 series of multi-service and Integrated Services routers.
Part Number
Description
NM-1FE2W/ and NM-1FE2W-V2
1-port 10/100 Ethernet 2 WAN Card Slot Network Module
NM-2FE2W and NM-2FE2W-V2
2-port 10/100 Ethernet 2 WAN Card Slot Network Module
NM-1FE1R2W
1-port 10/100 Ethernet 1 4/16 Token Ring 2 WAN Card Slot NM
NM-2W
2 WAN Card Slot Network Module (no LAN interface)
FEATURES
•
Supported on Cisco 2600 (NM-2W only) 2691, 3600, 3700 and 3800 series Branch office routers
•
Supports WICs and VWICs (see below for a complete list)
•
Increase WIC density in Cisco 2600, 2691, 3700 and 3800 series
•
Support for up to 8Mb throughput on a WIC interface
•
10/100 autosensing full/half duplex
•
Full and half duplex Token Ring Support
•
TDM enabled