HP 3012 AC JG409A Manuale Utente

Codici prodotto
JG409A
Pagina di 46
Gb/s
Multi Gigabit Fabric (MGF)
eases utilization of the main processor by transmitting Layer 2 packets directly via the MGF
Connectivity
High-density port connectivity
provides up to 10 interface module slots and up to three on-board Gigabit Ethernet ports
Multiple WAN interfaces
provides traditional links with E1, T1, Serial, and ISDN; high-density Ethernet access with WAN Gigabit Ethernet and LAN 4- and
9-port Fast Ethernet; mobility access with 3G SIC module and 3G/4G USB modems, and high-speed E3/T3 and 155 Mb/s OC3
access options
Packet storm protection
protects against broadcast, multicast, or unicast storms with user-defined thresholds
Loopback
supports internal loopback testing for maintenance purposes and an increase in availability; loopback detection protects against
incorrect cabling or network configurations and can be enabled on a per-port or per-VLAN basis for added flexibility
3G/4G LTE access support
provides 3G wireless access for primary or backup connectivity via a 3G SIC module certified on various cellular networks;
optional carrier 3G/4G LTE USB modems are available
USB interface
uses USB memory disk to download and upload configuration/OS image files; supports an external USB 3G/4G modem for a
3G/4G WAN uplink
Flexible port selection
provides a combination of fiber and copper interface modules, 100/1000BASE-X support, and 10/100/1000BASE-T auto-speed
detection plus auto duplex and MDI/MDI-X
Layer 2 switching
Spanning Tree Protocol (STP)
supports standard IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) for faster convergence, and IEEE 802.1s
Multiple Spanning Tree Protocol (MSTP)
Internet Group Management Protocol (IGMP) and Multicast Listener Discovery (MLD) protocol snooping
controls and manages the flooding of multicast packets in a Layer 2 network
Port mirroring
duplicates port traffic (ingress and egress) to a local or remotemonitoring port
VLANs
supports up to 4,094 VLANS or IEEE 802.1Q-based VLANs
sFlow
allows traffic sampling
Define port as switched or routed
supports command switch to easily change switched ports to routed (maximum of four Fast Ethernet ports)
Layer 3 routing
Static IPv4 routing
provides simple manually configured IPv4 routing
Routing Information Protocol (RIP)
uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes loop
protection
Open shortest path first (OSPF)
QuickSpecs
HP MSR3000 Series
Overview
DA - 14641   Worldwide — Version 4 — October 14, 2013
Page  5