Saeco Super-automatic espresso machine HD8761/18 HD8761/18 Manuale Utente
Codici prodotto
HD8761/18
16
ENGLISH
Measuring and programming water hardness
Measuring water hardness is very important for defi ning the frequency in
which the machine has to be descaled and to install the “INTENZA+” water
fi lter (for more detail on the water fi lter see next chapter).
which the machine has to be descaled and to install the “INTENZA+” water
fi lter (for more detail on the water fi lter see next chapter).
To measure the water hardness follow the steps below:
1
Immerse the water hardness tester strip (supplied with the machine) in
water for 1 second.
Note:
The tester strip can only be used for one measurement.
2
Wait for one minute.
23
4
A
B
C
In
tenza Ar
oma S
y
st
em
M
achine wat
er har
dness setting
1
3
Check how many squares have changed the colour to red and then
consult the table.
Note:
The numbers on the water hardness tester strip correspond to the water
hardness adjustment settings.
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
“INTENZA+” water fi lter. (see next chapter for this).
“INTENZA+” water fi lter. (see next chapter for this).
Y
ello
w
4
Press the “
” button and scroll the pages by pressing the “
” button
until the following icon is displayed.
Note:
The machine is supplied with standard water hardness setting, suitable for
most of the types of water.
most of the types of water.
Y
ello
w
5
Press the “
” button to increase the value or the “
” button to decre-
ase the value.
6
Press the “
” button to confi rm the setting.
Gr
een