Philips Clock Radio AJ4000B AJ4000B/05 Dépliant

Codici prodotto
AJ4000B/05
Pagina di 2
EN
             1 Important
• 
    Read these instructions.
• 
  Heed all warnings.
• 
  Follow all instructions.
• 
  Do not block any ventilation openings. Install in accordance with the 
manufacturer’s instructions.
• 
  Do not install near any heat sources such as radiators, heat registers, 
stoves, or other apparatus (including amplifi ers) that produce heat. 
• 
  Protect the power cord from being walked on or pinched, 
particularly at plugs, convenience receptacles, and the point where 
they exit from the clock radio.
• 
  Only use attachments/accessories specifi ed by the manufacturer.
• 
  Unplug this clock radio during lightning storms or when unused for 
long periods of time.
• 
  Refer all servicing to qualifi ed service personnel. Servicing is required 
when the clock radio has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects 
have fallen into the clock radio, the clock radio has been exposed to 
rain or moisture, does not operate normally, or has been dropped.
• 
  Battery usage CAUTION – To prevent battery leakage which may 
result in bodily injury, property damage, or damage to the clock 
radio: 
• 
   Install the battery correctly, + and - as marked on the clock radio. 
• 
  Remove the battery when the clock radio is not used for a long 
time.
• 
  The battery shall not be exposed to excessive heat such as 
sunshine, fi re or the like.
• 
   This clock radio shall not be exposed to dripping or splashing. 
• 
  Do not place any sources of danger on the clock radio (e.g. liquid 
fi lled objects, lighted candles). 
• 
  Where the plug of the Direct Plug-in Adapter is used as the 
disconnect device, the disconnect device shall remain readily 
operable.
       2 
Your clock radio
  Congratulations on your purchase, and welcome to Philips! To fully 
benefi t from the support that Philips offers, register your product at 
www.philips.com/welcome.
    What’s in the box
  Check and identify the contents of your package. (Fig.    )   
      3 Get 
started
  Always follow the instructions in this chapter in sequence.
    Install battery
Caution
 
 Risk of explosion! Keep the battery away from heat, sunshine or fi re. Never 
discard battery in fi re.
 
  The battery contains chemical substances, so it should be disposed of 
properly. 
 Insert one  9V 6F22  battery (not supplied) with correct polarity (+/-) as 
illustrated. (Fig    .)   
Note
 
The battery can only back up clock and alarm settings.
    Connect power (Fig.    )
Caution
 
 Risk of product damage! Make sure that the power voltage corresponds to 
the voltage printed on the back or underside of the clock radio.
 
  Risk of electric shock! When you unplug the power adapter, always pull the 
plug from the socket. Never pull the cord. 
Note
 
The type plate is located at the bottom of the clock radio.
     Set clock   (Fig.    )   
1     Switch the slider to  SET TIME .
 
»
   The hour and minute digits blink.
2     Press  HR  and  MIN  to adjust time.
3    Switch the slider to  CLOCK  to confi rm the setting.
       4 
Listen to FM radio
Note
 
 Keep the clock radio away from other electronic devices to avoid radio 
interference. 
 
  For better reception, fully extend and adjust the position of the FM antenna. 
   Tune to FM radio stations   (Fig    .)   
1     Switch the slider to    RADIO .
2    Rotate  TUNING  to select a station.
 
»
   The indicator shows the radio frequency of the waveband.
3     While listening, rotate  VOL  to adjust volume.
4    Switch the slider to  OFF  to turn off the radio.
       5 
Set alarm timer
    Set alarm
  Follow the illustration to set the alarm (Fig.    )   
• 
    AL1 : Set the fi rst alarm.
• 
   AL2 : Set the second alarm.
      Select alarm source   (Fig.    )   
  To select the last heard channel or buzzer as the alarm sound:
• 
    AL1 : Switch the slider to  RADIO  or  BUZ .
• 
   AL2 : Switch the slider to  RADIO  or  BUZ .
 
»
   The corresponding alarm icon lights up.
Note
 
 The gentle wake-up function is available for buzzer only. 
    Deactivate the alarm timer
  Switch  AL1  or  AL2  to  OFF  to deactivate the alarm clock.
 
»
   If the alarm timer is deactivated, the alarm indicator turns off.
      Snooze the alarm   (Fig.    )    
1     When alarm sounds, press  SNOOZE  . 
 
»
   The alarm snoozes and repeats ringing nine minutes later.
2     To reset the alarm, press  ALARM RESET .
 
»
The alarm repeats ringing for the next day.
       6 Other 
features
    Adjust brightness   (Fig.    )   
     Set sleep timer   (Fig.    )   
1     Press  SLEEP  repeatedly to set the sleep time.
 
»
   The radio turns on automatically. 
2     To check the remaining sleep time, press  SLEEP  again.
    To deactivate the sleep timer: 
• 
   Press  SLEEP  repeatedly until  [OFF]  appears.
      Charge your mobile phone
  You can use this device to charge your mobile phone.
Note
 
 Make sure that the USB socket and the Micro USB are used only for 
charging.
 
  Some USB cables may not work with this device due to different 
materials.  
 
The USB charging and Micro USB charging are available when AC 
power is connected.
    Option 1 :USB socket   (Fig.    )   
Note
 
The USB cable is not supplied.
    Option 2 : Micro USB   (Fig.    )    
 
      7 Product 
information
Note
 
Product information is subject to change without prior notice.
   Specifi cations
    Amplifi er
Rated Output Power
300mW RMS
    Tuner (FM)
Tuning Range
87.5 - 108MHz
 Sensitivity
   - Mono, 26dB S/N Ratio 
 <22 dBf 
Total Harmonic Distortion
<3%
Signal to Noise Ratio
>45dB
    General information
AC power (power adapter)
 Brand name: Philips; 
  Model: AS100-065-AI130;
  Input: 100-240 V~, 50/60 Hz; 0.5A;
  Output: 6.5 V     1.3 A 
Battery power
9 V
Operation Power Consumption
11 W
Standby Power Consumption
<1 W
USB Charge Voltage
DC 5V
Micro USB Charge Voltage
DC 5V
 Dimensions: 
  Main Unit (W x H x D) 
 
173x 64x 159 mm 
 Weight: 
  -Main Unit 
 
0.5 kg 
      8 Troubleshooting
Warning
 
Never remove the casing of this apparatus.
 To keep the warranty valid, never try to repair the system yourself. 
  If you encounter problems when using this apparatus, check the 
following points before requesting service. If the problem remains 
unsolved, go to the Philips web site (www.philips.com/support). When 
you contact Philips, ensure that the apparatus is nearby and the model 
number and serial number are available.
   No power
 
•    Ensure that the AC power plug of the unit is connected properly.
 
•   Ensure that there is power at the AC outlet.
     No sound
 
•    Adjust the volume.
     No response from the unit
 
•    Disconnect and reconnect the AC power plug, then turn on the unit 
again.
     Poor radio reception
 
•    Increase the distance between the unit and your TV or VCR.
 
•   Fully extend the FM antenna.
     Alarm does not work
 
•    Set the clock/alarm correctly.
     Clock/alarm setting erased
 
•    Power has been interrupted or the power plug has been 
disconnected. 
 
•   Backup battery is used up.
 
•   Reset the clock/alarm.
No charging
 
• Use the USB cable bypacked with your device for charging.
       9 Notice
   Any changes or modifi cations made to this device that are not expressly 
approved by Philips Consumer Lifestyle may void the user’s authority to 
operate the equipment.        
  This product complies with the radio interference requirements 
of the European Community. 
      
  Your product is designed and manufactured with high quality 
materials and components, which can be recycled and reused.   
    
  When this crossed-out wheeled bin symbol is attached to a 
product it means that the product is covered by the European 
Directive 2002/96/EC.
  Please inform yourself about the local separate collection system 
for electrical and electronic products.
  Please act according to your local rules and do not dispose of your old 
products with your normal household waste. Correct disposal of your 
old product helps to prevent potential negative consequences for the 
environment and human health. 
    
  Your product contains batteries covered by the European 
Directive 2006/66/EC, which cannot be disposed with normal 
household waste.  Please inform yourself about the local rules 
on separate collection of batteries because correct disposal helps to 
prevent negative consequences for the environmental and human 
health.
     Environmental information 
  All unnecessary packaging has been omitted. We have tried to make 
the packaging easy to separate into three materials: cardboard (box), 
polystyrene foam (buffer) and polyethylene (bags, protective foam 
sheet.) 
  Your system consists of materials which can be recycled and reused 
if disassembled by a specialized company. Please observe the local 
regulations regarding the disposal of packaging materials, exhausted 
batteries and old equipment.
    2012 © Koninklijke Philips Electronics N.V. All rights reserved.
  Specifi cations are subject to change without notice. Trademarks are 
the property of Koninklijke Philips Electronics N.V. or their respective 
owners. Philips reserves the right to change products at any time 
without being obliged to adjust earlier supplies accordingly.   
AJ4000B_05_UM_V1.0.indd   2
AJ4000B_05_UM_V1.0.indd   2
11/23/2012   9:51:02 AM
11/23/2012   9:51:02 AM