Panasonic ET-PKC200W Dépliant
S
P E C
F
I L E
ET-
PKC200W
Wall-hanging bracket
As of April 2013
SFD12A018-1
1 / 2
Specifications
Vertical correction angle:
+4° – -2°
Horizontal slant correction angle:
+5° – -5°
Dimensions (W × H × D):
463 × 244 × 711 mm
(18-7/32 × 7-27/32 × 28 inches)
(18-7/32 × 7-27/32 × 28 inches)
Weight:
Approx. 8.5 kg* (18.7 lbs*)
Applicable projector:
PT-CW331R/CW330/CW241R/CW240/CX301R/CX300
Parts
Wall-hanging bracket . . . . . . . . . . . . . . . . . . . . . 1
Washer-fitted screws (M4 × 10)
. . . . . . . . . . . . . . . . 9
Projector mounting bracket (L)
. . . . . . . . . . . . . . . 1
Projector mounting bracket (R)
. . . . . . . . . . . . . . . 1
Cover plate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Arm bracket with adjustment unit
Arm bracket with adjustment unit
. . . . . . . . . . . . . 1
Safety wire . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Cable tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wall-hanging bracket mounting sheet . . . . . . . . . 1
Cable tie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Wall-hanging bracket mounting sheet . . . . . . . . . 1
* Average value. May differ depending on models.
Description
This bracket is used when mounting a Panasonic’s applicable projector to walls.
This bracket is used when mounting a Panasonic’s applicable projector to walls.
C a u t i o n :
• Mounting should be done by a qualified technician.
• Make sure that the mounting (wall) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
• Mounting should be done by a qualified technician.
• Make sure that the mounting (wall) area has sufficient strength.
• Read the enclosed mounting instructions thoroughly before starting.
• Do not use an electric screwdriver or impact driver to tighten screws. Use a torque driver or hexagon torque
wrench and tighten screws to the torque specified in the instructions.
• When the product is no longer going to be used, have it disposed of quickly by a professional disposal service.
357 (14-1/16)
37 (1-15/32)
Ma
ximu
m
length
:
834
(
32-27/32
)
549
(21
-5/8
)
367
(14
-7/
16
)
17
4
(6
-2
7/
32
)
475
(18
-11/16
)
463 (18-7/32)
231
(9
-3/32
)
70
(2-3
/4
)
Minimu
m
length
:
711
(28
)
711
(28
)
Projector
Projector
Wall-hanging bracket
Wall-hanging bracket
The illustration shows the wall-hanging bracket
attached to the projector.
attached to the projector.
unit : mm (inch)
NOTE: This illustration is not drawn to scale.
Dimensions
Washer-fitted hexagonal bolts (M8 × 20) . . . . . . . 4
Washer-fitted hexagonal bolts (M5 × 10) . . . . . . . 2
Washer-fitted hexagonal bolts (M5 × 10) . . . . . . . 2