Enermax iVektor ECA3311A-W Manuale Utente

ECA3311A-B

ECA3311A-W

     

iVektor – Soft Grip. Drive Hard. 
Multi-functional and race-inspired Midi Tower with maximum usability and high-performance cooling for 
gaming rigs and workstations.

Soft-Grip Coating
Innovative rubber skin which creates a quality and stylish appearance. Positive side effect: The new soft-grip 
coating from Enermax has a shock-absorbing effect, reduces noise and prevents the case from fingerprints 
and scratches.

Multi-GPU Support
Seven extension card slots allow for the installation of up to three graphics cards.

Flexible HDD/SDD Cage
Multifunctional upper HDD/SSD cage with movable side bracket. When removing the bracket, you can 
create space for oversized graphics cards with up to 415mm length and improve the air circulation inside 
the case. In center position, the bracket allows for the installation of four 2.5” HDD/SDD. Mounted in the 
outer position, up to four 3.5” HDD/SSD can be installed.

Powerful Cooling System
One 12cm rear fan included. Many options to upgrade the cooling system with numerous additional fans: 
two 12cm fans in the front, two 12cm fans at the top and one 12cm fan at the bottom.

3-step Speed Control
RPM control of the integrated 12cm rear fan and one optional fan. The speed can be controlled in three steps 
with a switch on the top of the case.

Ready for Water-Cooled Systems
Supports 240mm radiators at the top. Two tubing holes at the back for the integration of high-perfor-
mance water cooling systems.

Sophisticated Data Storage
The case accommodates up to 7 data storage devices (HDD & SSD): One cage for three 3.5” HDD and one 
multi-functional cage to accommodate either four 3.5” HDD/SSD or four 2.5” HDD/SSD.

Protection Against HDD Vibration
HDD rails with rubber pads effectively reduce vibrations.

Ultra High-Speed Data Transfer
Two USB 3.0 ports on the top panel for a lightning-fast data transfer with up to 5Gb/sec.