IQinVision Alliance-pro IQA33WE-B5 Manuale Utente
Codici prodotto
IQA33WE-B5
Architectural and Engineering Specification
IQA33WI, IQA33WE, IQA33WX
Page 3 of 14
Revision: (07302013)
Q. The IP dome camera shall have a configurable virtual camera window that can be any portion of
the field-of-view acting like an independent camera with configurable resolution and frame rate.
R. The IP dome camera shall conform to the ONVIF standard.
S. The IP dome camera shall conform to the PSIA standard.
T. The IP dome camera shall be Power over Ethernet (IEEE802.3af Class1) compliant for
indoor/outdoor applications.
U. The IP dome camera shall have an integrated 3-13mm megapixel IR corrected varifocal lens with
F1.4, and 1/3” optical format.
V. The IP dome camera shall provide a cast-aluminum ceiling plate (IQA33NI) or cast-aluminum
back box housing (IQA33NE & IQA33NX), polycarbonate dome and auto tracking inner liner.
W. The IP dome camera (IQA33NE & IQA33NX) shall provide protection against water and dust up
to IP66 / NEMA4 standards.
X. The IP dome camera shall be designed to be surface mounted to a wall or ceiling and wall
mounted with optional accessories.
Y. The IP dome camera shall be designed to be mounted to a single or double gang outlet box.
Z. The IP dome camera shall have a 3-axis gimbal providing 360˚pan, 90˚ tilt and 350˚ azimuth for
easy camera positioning.
AA. The IP dome camera minimum illumination requirement to produce an image in color mode will
be 0.30 lux (0.03 fc) with an F1.4 lens.
BB. The IP dome camera shall provide an automated IR filter that will automatically switch from
color to monochrome enhancing low lighting or in applications where IR illumination is utilized.
CC. The IP dome camera shall require less than 0.05 lux (0.005 fc) to produce a monochrome image
when in night mode.
DD. The IP dome camera shall be sensitive from 800nm to 940nm IR illumination.