ZyXEL 660HW-D1 91-004-593001B Manuale Utente

P-660H/HW-D Series User’s Guide

61

Chapter 3 Wizard Setup for Internet Access

The following table describes the fields in this screen.

Figure 23   Internet Connection with ENET ENCAP

The following table describes the fields in this screen.

Table 10   Internet Connection with RFC 1483

IP Address

This field is available if you select Routing in the Mode field.
Type your ISP assigned IP address in this field. 

Back

Click Back to go back to the previous wizard screen.

Next

Click Next to continue to the next wizard screen.

Exit

Click Exit to close the wizard screen without saving your changes.

Table 11   Internet Connection with ENET ENCAP

Obtain an IP 

Address 

Automatically

A static IP address is a fixed IP that your ISP gives you. A dynamic IP address is not 

fixed; the ISP assigns you a different one each time you connect to the Internet.
Select Obtain an IP Address Automatically if you have a dynamic IP address.

Static IP 

Address

Select Static IP Address if your ISP gives you a fixed IP address.

IP Address

Enter your ISP assigned IP address.

Subnet Mask

Enter a subnet mask in dotted decimal notation. 
Refer to the appendices to calculate a subnet mask If you are implementing subnetting.

Gateway IP 

address

You must specify a gateway IP address (supplied by your ISP) when you use ENET 

ENCAP in the Encapsulation field in the previous screen.

First DNS 

Server

Enter the IP addresses of the DNS servers. The DNS servers are passed to the DHCP 

clients along with the IP address and the subnet mask.