Axis T91A50 5504-501 Scheda Tecnica

AXIS T91A50 Telescopic Ceiling Mount is designed for in-
door installations where the camera needs to be installed 
in a high ceiling. The telescopic functionality allows the 
installer to adjust the length in an easy and secure way. 
AXIS T91A50 is designed to swing and not break if hit by 
forklifts or tall vehicles. To prevent the mount from sway-
ing, AXIS T91A50 can be secured with wires that run 
through the integrated eyelets. AXIS T91A50/T91A51 can 
also be installed in sloped ceilings thanks to the ball joint 
which ensures that the camera is still hanging straight. 
For further protection, the Ethernet cable is routed 
through the pipe and exit in the conduit holes, either at 
the bottom plate or at the side.

A new range of mounting accessories  for installing Axis cameras and housings in different locations. 
They are designed to save installation time and costs.

Mounting accessories for various locations and positions.

For indoor camera installations in low ceilings, where 
the camera needs to be as close as possible to the 
ceiling, AXIS T91A51 Ceiling Mount is the ideal option. 
AXIS T91A50/T91A51 are compatible with most Axis 
cameras and housings. 

AXIS T91A47 Pole Mount is designed for both indoor 
and outdoor use. It is available in two versions, one for 
poles 60–110 mm (2.4–4.3 in) in diameter and one for 
poles 110–400 mm (4.3–15.7 in) in diameter. Addition-
ally, it can be used for attaching cameras to beams. The 
network cable can enter either from behind or from the 
side of the mount. When AXIS T91A47 is used for a fixed 
dome camera, no additional accessories such as pen-
dant kits are required, ensuring a cost efficient solution.