Bosch DS9370 Manuale Utente
Intrusion Alarm Systems | DS9370 Series Panoramic TriTech Detector
DS9370 Series Panoramic TriTech Detector
www.boschsecurity.com
u
Up to 7.6 m (25 ft) mounting height
u
Fully adjustable optics for coverage integrity and
customization
customization
u
Hinged chassis and base plate for easy installation
u
High efficiency LED and light pipe system for easy
walk testing
walk testing
u
First Step processing (FSP)
Each DS9370 Series TriTech
®
PIR/Microwave Detector
model is panoramic and uses several patented
processing techniques to provide excellent catch
performance with freedom from false alarms. Each
model can be mounted on ceilings as high as 7.6 m
(25 ft). With three separate PIR sections that are fully
adjustable, the DS9370 Series provides coverage
integrity at all mounting heights, plus the ability to
customize the coverage for specific areas.
processing techniques to provide excellent catch
performance with freedom from false alarms. Each
model can be mounted on ceilings as high as 7.6 m
(25 ft). With three separate PIR sections that are fully
adjustable, the DS9370 Series provides coverage
integrity at all mounting heights, plus the ability to
customize the coverage for specific areas.
Functions
Signal Processing
Uses passive infrared and microwave technologies to
provide an alarm condition when both fields of
protection are simultaneously activated. Alarm signals
must meet the signaling requirements of both
technologies to activate an alarm.
provide an alarm condition when both fields of
protection are simultaneously activated. Alarm signals
must meet the signaling requirements of both
technologies to activate an alarm.
First Step Processing
FSP allows virtually instant response to human targets
without sacrificing false alarm immunity to other
sources. By adjusting its sensitivity based upon signal
amplitude, polarity, slope and timing, FSP eliminates
the need for the installer to select the sensitivity level
for the application. Each sensor is processed
individually and both must agree there is an alarm
before the alarm relay is activated.
without sacrificing false alarm immunity to other
sources. By adjusting its sensitivity based upon signal
amplitude, polarity, slope and timing, FSP eliminates
the need for the installer to select the sensitivity level
for the application. Each sensor is processed
individually and both must agree there is an alarm
before the alarm relay is activated.
Microwave Signal Processing
Adaptive processing adjusts to background
disturbances. This helps to reduce false alarms while
maintaining catch performance.
disturbances. This helps to reduce false alarms while
maintaining catch performance.
Microwave Supervision
Patented fully supervised microwave provides single
technology coverage in the event the microwave
subsystem fails.
technology coverage in the event the microwave
subsystem fails.
Test Features
• High efficiency LED and light-pipe system provide
walk test indication that is easily viewable from any
angle and at any mounting height.
angle and at any mounting height.
• Alarm memory feature allows detector to latch the
alarm LED to aid in response.
• Remote LED walk-test control allows the LED to be
enabled or disabled using a switched input without
accessing the detector.
accessing the detector.
Certifications and approvals
Australia
DS9370: AUS C-tick
China
CCC
2004031901000038
Europe
Complies with EN50131‑1, Grade 2