Transition Networks SPOEB1011-100 SPOEB1011-100-TC Dépliant
Codici prodotto
SPOEB1011-100-TC
Stand-Alone
Ordering Information
SPOEB1011-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm multimode (ST)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SPOEB1013-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1300nm multimode (SC)
[2 km/1.2 mi.] Link Budget: 11.0 dB
SPOEB1014-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[20 km/12.4 mi.] Link Budget: 16.0 dB
SPOEB1015-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[40 km/24.9 mi.] Link Budget: 26.0 dB
SPOEB1016-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm SM (SC)
[60 km/37.3 mi.] Link Budget: 29.0 dB
SPOEB1017-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[80 km/49.7 mi.] Link Budget: 29.0 dB
SPOEB1035-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm SM (SC)
[120 km/74.6 mi.] LB: 36.0 dB
Single Fiber Products
Recommended use in pairs
SPOEB1029-100
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1310nm TX/1550nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
SPOEB1029-101
10/100BASE-TX (RJ-45)
[100 m/328 ft.]
to 100BASE-FX 1550nm TX/1310nm RX
single fiber single mode (SC)
[20 km/12.4 mi.] LB: 19.0 dB
Optional Accessories (sold separately)
Mounting Options
WMBD or WMBL
Wall Mount Brackets
RMS19-SA4-01
4-Slot Media Converter Shelf
Specifications
Standards
IEEE Std. 802.3, IEEE Std. 802.3af
Switches
SW1: Auto-Negotiation On/Off
SW2: Speed TP: Force 10 Mbps or 100 Mbps (SW1 off)
SW3: Duplex TP: Force Half or Full Duplex (SW1 off)
SW4: Duplex Fiber: Half or Full Duplex
SW5: AutoCross™ On/Off
SW6: PSE On/Off
SW7: PSE/LPT on/off
SW8: Unused
Max Packet Size
1522 bytes untagged
1518 bytes tagged
Dimensions
Width: 3.25” [82 mm]
Depth: 4.8” [120 mm]
Height: 1.0” [25 mm]
Power
90 – 250 VAC external power supply
Power Consumption
20 Watts max.
Operating Temperature
0 – 40°C [32° – 104°F]
Storage Temperature
-25° to +85°C [-13° to +185°F]
Environment
5% – 95% humidity non-condensing;
0 – 10,000 ft. altitude
Shipping Weight
2 lbs. [0.90 kg]
Compliance
EN55022:1994+A1:1996+A2:1997 Class A;
FCC Part 15 Subpart B; UL 1950
Warranty Lifetime
Power Over CAT5 to Remotely Located Devices
SPOEB10xx-100
SPOEB10xx-100
stand-alone media converter
Power-Over-Ethernet 10/100BASE-TX to 100BASE-FX
10/100 Bridging
Power-Over-Ethernet PSE Media Converter
Features
4
External AC power supply
4
IEEE802.3af Power-Over-Ethernet
Compatible
4
48 VDC PSE Output Voltage
4
Signal Pair or Spare Pair Power Insertion
4
PD Detection Signature
4
Over-Current Protection & Under-Current
Detection
4
Powered Device Reset
4
Switch selectable features and port
settings
4
Minimum Load Sensing
4
Fault Protection Input
4
Auto-Negotiation
4
AutoCross™ [
4
Link Pass Through
4
Far-End-Fault (FEF)
4
Automatic Link Restoration
Enables enterprises to provide power to network de-
vices over the existing CAT5 data connection.
Transition’s AC powered PoE media converters com-
Transition’s AC powered PoE media converters com-
bine data received over a fiber optic link with -48 VDC
power; providing power to Data Terminal Equipment
(DTE) Power Devices (PD) over unshielded twisted pair
cable. The PoE converters are Power Sourcing Equip-
ment (PSE) and are fully compatible with Powered
Devices (PD) that comply with the IEEE802.3af: 2003
standard. The converters also include a PD signature
sensing and power monitoring features per the IEEE
802.3af standard. Other features include Over-Current
Protection, Under-Current Detection and Fault Protec-
tion Input.
This feature enhanced model offers the ability to en-
This feature enhanced model offers the ability to en-
able/disable many of the features as well as force port
capabilities (see switch section under specifications to
the right).
In addition, with the PSE/LPT switch enabled, a loss of
In addition, with the PSE/LPT switch enabled, a loss of
Fiber RX will disable PSE power output on the UTP port
for 2 seconds to allow remote device to re-initialize.
(Also known as Powered Device Reset.)
The PoE converter is fully compatible with devices that
The PoE converter is fully compatible with devices that
comply with the IEEE802.3af standard. The PoE con-
verter is capable of inserting power on data pairs or
spare pair of the MDI.
Power-Over-Ethernet 10/100BASE-TX to 100BASE-FX