B-Tech BT936 BT936/W Dépliant
Codici prodotto
BT936/W
Designed for use with UK 2 gang,
47mm (1.8”) deep electrical boxes
47mm (1.8”) deep electrical boxes
• Integrated transformer design for maximum efficiency
• High power rating - 60 watts
• Accepts loudspeaker cable up to 2.5mm diameter
• Suitable for loudspeakers; 4, 6 or 8 ohms
• Frequency response; 20 - 20,000 Hz
• Available in Silver
• High power rating - 60 watts
• Accepts loudspeaker cable up to 2.5mm diameter
• Suitable for loudspeakers; 4, 6 or 8 ohms
• Frequency response; 20 - 20,000 Hz
• Available in Silver
Premium In-Wall
Loudspeaker Volume Control
with Screw Terminals
© 2011 B-Tech International Limited. All rights reserved.
The information in this specification sheet reflects the current technical specifications at the time of print. We reserve the right to change the technical or physical specifications without prior notice.
The B-Tech name, the B-Tech logo and Better by Design are all registered trademarks of B-Tech International Ltd. All other brands and products are trademarks of their respective owners.
All B-Tech images and symbols are exclusive property of B-Tech International Ltd. B-Tech accept no liability for loss or damage caused by improper installation or mounting on unstable structures.
Any reproduction or retransmission or republication of any part of this specification sheet is strictly prohibited, unless prior written permission has been granted by B-Tech International Ltd. E&OE.
The information in this specification sheet reflects the current technical specifications at the time of print. We reserve the right to change the technical or physical specifications without prior notice.
The B-Tech name, the B-Tech logo and Better by Design are all registered trademarks of B-Tech International Ltd. All other brands and products are trademarks of their respective owners.
All B-Tech images and symbols are exclusive property of B-Tech International Ltd. B-Tech accept no liability for loss or damage caused by improper installation or mounting on unstable structures.
Any reproduction or retransmission or republication of any part of this specification sheet is strictly prohibited, unless prior written permission has been granted by B-Tech International Ltd. E&OE.
www.btechavmounts.com
B-TECH AUDIO VIDEO MOUNTS
AND ACCESSORIES
Product Information
BT936
BT936
For more information please visit www.btechavmounts.com/BT936
www.btechavmounts.com
SS-BT936-V1-120811 Page 1 of 1
audio video
Controls
audio video
Controls
TECHNICAL INFORMATION
GENERAL INFORMATION
This high quality volume control can
be located anywhere on the loudspeaker
cable to suit the installation. For example,
with an amplifier located in the living
room powering a pair of loudspeakers
in a bedroom, the control can be
located in the bedroom.
be located anywhere on the loudspeaker
cable to suit the installation. For example,
with an amplifier located in the living
room powering a pair of loudspeakers
in a bedroom, the control can be
located in the bedroom.
TECHNICAL NOTES
This volume control is designed to be
mounted ‘In-Wall’ using a standard
47mm (1.8”) deep electrical box. We
recommend using high quality metal
boxes and rubber grommets must
be used in the “knock out” holes to
prevent loudspeaker cable chafing.
mounted ‘In-Wall’ using a standard
47mm (1.8”) deep electrical box. We
recommend using high quality metal
boxes and rubber grommets must
be used in the “knock out” holes to
prevent loudspeaker cable chafing.
CAUTION
Extreme care should be taken when
using bare ended loudspeaker wire.
To avoid possible short circuits strip
loudspeaker wire no more than 6mm (¼”).
using bare ended loudspeaker wire.
To avoid possible short circuits strip
loudspeaker wire no more than 6mm (¼”).
Screw Terminals for strong
connection and minimum loss
Premium In-Wall Loudspeaker Volume Control
with Screw Terminals
80mm (3.1")
140mm (5.5")
AMP
LEFT LOUDSPEAKER
RIGHT LOUDSPEAKER
VOLUME CONTROL
LOUDSPEAKER VOLUME CONTROL
DIRECTIONS FOR USE
1. Switch off amplifier and other connected
equipment before installing the
Loudspeaker Volume Control.
2. Decide location of the Loudspeaker Volume
Control, which can be placed anywhere
along the loudspeaker cable line.
3. Connect cables from amplifier to the terminals
marked "In".
4. Connect loudspeakers to terminals marked "Out".
5. Select volume level required using the level
5. Select volume level required using the level
control on the amplifier with the BT936
control set at the middle level.
6. Fine tune volume level locally using the
BT936 Loudspeaker Volume Control.