Pyle PITLBT20 Dépliant

To reduce the risk of electric shock, burns, 
fire or injury:
1) Do not use while bathing or in a shower.
2) Do not place or store unit where it can fall or
    be pulled into a tub or sink.
3) Do not place in, drop or submerge in water or 
    other liquid.
4) Do not reach for unit that has fallen into water.
    Unplug it immediately.
5) Care should be taken so that objects do not 
    fall and liquids are not  spilled onto the unit.

1) Close supervision is necessary when this 
    appliance/product is used by or near children or 
    mentally disabled individuals.
2) Use this unit only for its intended use as
    described in this manual.
3) Unplug this unit during lightning storms or when
    unused for long period of time.
4) Never drop or insert an object into any opening.
5) Protect the power cord from being walked on
    or pinched, particularly at plug outlets, 
    convenience receptacle and the point where it
    exits the unit.
6) Do not allow cord to touch hot surfaces. Wrap 
    cord loosely around the unit when storing.
7) The unit should be situated away from direct 
    sunlight or heat sources such as radiators, 
    electric heaters, heat registers, stoves, or other 
    units (including amplifiers) that produce heat.
    Avoid placing on top of stereo equipment that 
    radiates heat.
8) Never block the air openings of the unit with 
    materials such as clothing, plastic bags or 
    papers, or place it on a soft surface such  as
    a bed or couch, where the air openings may
    be blocked.
9) Do not overload electrical outlet. Use only the 
    power source as indicated.
10) Do not carry this unit by cord or use cord 
      as handle.
11) Never operate the unit if it has a damaged 
      cord or plug, if it is not working properly, or if it
      has been dropped or damaged, or dropped into
      water. If the unit’s power supply cord or plug 
      is damaged, do not attempt to fix it yourself.
12) To avoid the risk of electric shock, do not 
      disassemble or attempt to repair the unit. 
      Incorrect repair can cause risk of electric shock 
      or injury to persons when unit is used.
13) Do not operate in the presence of explosive 
      and/or flammable fumes.
14) Never remove the plug from the socket by 
      pulling the power cord.
15) Check the voltage indicated on the AC adapter
      and make sure it corresponds to the local 
      voltage before you connect the adapter to an 
      electrical socket.

      

16) Never use the AC adapter, charging tray or 
      receive case if any of them are damaged in 
      any way.
17) Only use the official AC adapter (supplied 
      together with the Greentech Power Tray mini).
18) Do not use the charging tray outdoors or 
      near heat surfaces.
19) If you have a pacemaker or other implanted
      device, consult your doctor or the
      manufacturer of the implanted device before 
      using the charging tray.

*****************************************************

*TO REDUCE THE RISK OF ELECTRIC SHOCK, 
DO NOT REMOVE COVER. THERE ARE NO 
SERVICEABLE PARTS INSIDE.

*TO REDUCE THE RISK OF FIRE OR ELECTRIC 
SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN
 OR MOISTURE.

                        The lightning flash with arrow-head 
                        symbol  within an equilateral triangle 
                        is intended to alert the user  to the 
                        presence of uninsulated “dangerous
                        voltage”  within

the unit’s enclosure 

 that may be of  sufficient magnitude to constitute a
 risk of electric shock. 

                         The exclamation point within an 
                         equilateral triangle is intended to 
                         alert the user to the presence of 
 important operating and maintenance (servicing) 
 instructions in the literature accompanying the unit.

       

IMPORTANT SAFETY INSTRUCTIONS

All the safety and operating instructions should 
be read, adhered to and followed before the unit is 
operated.

SAVE THESE INSTRUCTIONS

The device complies with part 15 of the FCC rules.
Operation is subject to the following two condition:
<1> This device may not cause harmful interference,
<2> This device must accept any interference
        received, in cluding interference that may 
        cause undesired operation.

Model No.: 

PITLBT30/20

             DC 5V   0.5A
Made in China 

1.     Plug the mini USB plug of the included USB cable into the mini USB jack on the handset
        base. Connect the USB plug on the other side of the cable to power source (it can be a 
        USB port of a computer or an USB jack of an AC adapter).
2.     Put the Bluetooth Retro Handset on the handset base. The Power LED should light. If the
        LED does not light, check the followings,
        - 

The plugs of the USB cable are properly connected.

        - 

Rotate the handset 180  degrees and put it properly on the handset base.

3.     The handset will be automatically charged wirelessly. Allow it to be charged for  about 3-4 
         hours before the first use.
4.     You need to pair the Bluetooth Retro Handset with your cell phone (Bluetooth pairing is 
        the process of establishing the wireless link between 2 devices). Refer to your cell phone
        manual for instructions on how to use the Bluetooth pairing function in your phone.

5.     Push and hold the button on the Bluetooth Retro Handset. After about 5 seconds, the button 
        will illuminate briefly and the Bluetooth Retro Handset will make a short beep. Continue 
        holding the button for another 3-4 seconds until the blue light of the button starts to blink
        rapidly. The Bluetooth Retro Handset is now in pairing mode.
6.     Follow your phone’s instruction manual regarding the Bluetooth portion. This normally 
        involves going to a “Setup”, “Connect”, “Connection” or “Bluetooth” menu on your cell phone. 
        Select the option to “Look for devices”, “Add a device” or “Discover” to initiate the Bluetooth
        pairing process.
7.     Your cell phone will scan for nearby Bluetooth devices and should locate the Bluetooth 
        Retro Handset within 10-20 seconds.
8.     When the cell phone display shows “Not connected”, touch the screen “Not connected”. The
        cell phone starts to connect with the Bluetooth Retro Handset.
9.     The button on the Bluetooth Retro Handset will change from rapid blinking to slow blinking. 
        The Bluetooth Retro Handset is paired with your cell phone.
10.    At this point you should be able to place a call using your cell phone (through keypad,
         phone book, or voice dial) and use the Bluetooth Retro Handset in place of your phone’s
         handset. The Bluetooth Retro Handset functions much like any hands free headset.
11.    When there is incoming call, there will be melody on Bluetooth Retro Handset. To answer
         an incoming call, press the button on the Bluetooth Retro Handset. Press the button again 
         to terminate the call.
12.    To turn off the Bluetooth Retro Handset, press and hold the button for about 3 seconds
         until you hear a short sound and the blue light of the button turns off.

Wireless Charging Bluetooth Retro Handset