Axis Q6042-C 0562-001 Scheda Tecnica
Codici prodotto
0562-001
Reliable operation in searing heat
AXIS Q60-C PTZ domes ensure reliable surveillance in demanding environments. The cameras are tested to meet the tough
MIL-STD-810G standard for high temperature, temperature shock, radiation, rain, humidity, salt fog, sand and dust.
Robust, high-performance cameras
AXIS Q60-C cameras are designed for round-the-clock pan/tilt/operation,
with 360° endless pan and high zoom for coverage of an extremely wide
area. AXIS Q6045-C, for instance, can capture the license plate of cars
up to 275 m (900 ft.) away. The cameras can be automatically directed
to 256 preset positions using guard tour.
with 360° endless pan and high zoom for coverage of an extremely wide
area. AXIS Q6045-C, for instance, can capture the license plate of cars
up to 275 m (900 ft.) away. The cameras can be automatically directed
to 256 preset positions using guard tour.
Engineered for handling extreme heat
AXIS Q60-C cameras use Peltier technology to increase the operating
temperature to 75 °C (167 °F). The advanced climate control also handles
rapid temperature changes to eliminate condensation on the clear dome
cover. The system ensures that the cameras always operate at an optimal
temperature to reduce wear and tear to maintain the cameras’ lifetime.
temperature to 75 °C (167 °F). The advanced climate control also handles
rapid temperature changes to eliminate condensation on the clear dome
cover. The system ensures that the cameras always operate at an optimal
temperature to reduce wear and tear to maintain the cameras’ lifetime.
Peltier element (1) draws heat out of or into the camera as needed; forms part of the barrier separating the camera unit from the outer environment.
(2) Fan. (3) Heat sinks. (4) Air-tight camera compartment; no air flow between camera unit and outer part. (5) Heat inside is transferred out. (6) Warmer air out
(7) Cooler air in.
(2) Fan. (3) Heat sinks. (4) Air-tight camera compartment; no air flow between camera unit and outer part. (5) Heat inside is transferred out. (6) Warmer air out
(7) Cooler air in.
System schematic
An AXIS Q60-C connects to the supplied AXIS T8605 Media Converter
Switch using an IP66-rated multi-connector cable [1], which attaches
to the camera with a simple click. Through the media converter switch,
the multi-connector cable enables the camera to receive power (power
supply [2] not included), and send and receive data to and from external
alarm devices and the network. Two SFP slots and two RJ45 connectors
in the media converter switch give installers the flexibility to network the
cameras cost-effectively over long distances in a daisy chain or in a ring
Switch using an IP66-rated multi-connector cable [1], which attaches
to the camera with a simple click. Through the media converter switch,
the multi-connector cable enables the camera to receive power (power
supply [2] not included), and send and receive data to and from external
alarm devices and the network. Two SFP slots and two RJ45 connectors
in the media converter switch give installers the flexibility to network the
cameras cost-effectively over long distances in a daisy chain or in a ring
topology for increased reliability in the event of a single point of failure.
(IGMP filtering is not supported and ring topology requires a switch sup-
porting IEEE 802.1D Spanning Tree Protocol). The RJ45 connectors can
also be used for connection to complementary cameras such as a ther-
mal camera or temporarily to a laptop to service the system locally. With
bayonet connection [3], an AXIS Q60-C camera attaches easily to Axis’
standard mounting accessories. Support for shock detection enables the
camera to trigger an alarm if it has been hit.
(IGMP filtering is not supported and ring topology requires a switch sup-
porting IEEE 802.1D Spanning Tree Protocol). The RJ45 connectors can
also be used for connection to complementary cameras such as a ther-
mal camera or temporarily to a laptop to service the system locally. With
bayonet connection [3], an AXIS Q60-C camera attaches easily to Axis’
standard mounting accessories. Support for shock detection enables the
camera to trigger an alarm if it has been hit.