Equip Pocket KVM Switches USB + Audio 331512 Manuale Utente

Manual_

Page 6

www.equip-info.net

Each keystroke within a hotkey sequence should be pressed within 2 seconds. Otherwise,

the hotkey sequence will not be validated. 

After perform port switching,  you have to wait till the KVM Switch icon shows forth the

target port before you can perform next switching again. The KVM Switcher icon could be

found on the system tray of your Windows desktop after its installation.

All the hotkeys are only functional after your PCs are booting into the OS.  If you want to

switch PC in the BIOS/preboot stage, press the face-panel button to switch.

3.3. KVM Switcher Software (only for Windows platform)

In addition to PC switching, the KVM Switcher Software also allows you more advanced

functions such as described in the next section ...

•  Switch to PC x by Operation Menu

Right-click the KVM Switcher icon to evoke the operation menu, then select whichever PC

that is available for switching. Once you select a PC channel, it will immediately switch to

that PC. Note that the unconnected port(s) or the active port will be grayed-out and non-

selectable.

•  Switch to PC x by Keyboard Hotkeys

Hit the hotkey according to your current hotkey definition:

Hotkey Sequenz = Ctrl + Alt + [Command Key]

The factory default hotkey setting is Ctrl + Alt + 1/2/3/4 for PC 1/2/3/4. 

You can also use ScrLk + ScrLk to switch PC.

KVM Switch Benutzermenü

KVM Switch Konfigurations-Dialog-Box