DELL M8034-RF Manuale Utente
![DELL](https://files.manualsbrain.com/attachments/2e2ed634a275b6b98ad69257c58632e179ac1658/common/fit/150/50/0b94a25108df4a3b962d3b8aa65fc4eda1ead8e68832a26b3f5ed6aa6a0b/brand_logo.png)
SYSTEMS MANAGEMENT
www.dell.com/powersolutions
Reprinted from Dell Power Solutions, February 2007. Copyright © 2007 Dell Inc. All rights reserved
.
DELL POWER SOLUTIONS
3
3.
In the Open dialog box, select the configuration file, click the
Open button, and select “Apply.”
4.
When prompted, confirm the new configuration.
Note: When adding a saved configuration to a replacement
controller, administrators should ensure that the number and size of
the physical disks connected to the controller are exactly the same
as they were when the configuration was saved.
Changing virtual disk properties and configurations
Administrators can modify properties (such as the read, write, I/O,
and access policies) for virtual disks configured on the PERC 5/i by
selecting the virtual disk in the left panel, then clicking the Operations
tab and selecting “Set Virtual Disk Properties” (see Figure 2).
To change virtual disk configurations, administrators can use
the Dell SAS RSM Reconstruction Wizard, which allows changes
to the RAID level and virtual disk without data loss. (This feature
is only available for virtual disks configured on the PERC 5/i.) For
example, administrators can change the RAID level of a preconfig-
ured RAID-0 virtual disk as follows:
1.
Select a virtual disk in the left panel of the application’s main
window, then select Operations>Advanced Operations>
Reconstruction Wizard in the menu bar.
2.
Click the Next button.
3.
Select a different RAID level from the drop-down menu in the
lower right corner of the window, then click the Finish button.
Administrators can monitor the reconstruction progress by
selecting Group Operations>Show Progress in the menu bar.
Identifying disk errors with Patrol Read
Dell SAS RSM uses the Patrol Read controller feature to identify
disk errors. Patrol Read can be run on disks configured in virtual
disk arrays or as hot spares, and is designed to correct disk errors
and restore data integrity.
Dell SAS RSM enables administrators to set the Patrol Read
mode to Auto, Manual, or Disable. Auto mode initiates Patrol Read
based on the schedule enforced by the controller, Manual mode
enables administrators to start or stop Patrol Read manually, and
Disable mode prevents Patrol Read from executing.
Monitoring system activity and performance
Dell SAS RSM monitors the activity and performance of controllers
and the storage devices connected to them:
•
Controllers: Controller status is displayed in the left panel
of the application’s main window. If a controller fails, a
small red circle appears to the right of the controller icon. To
display complete controller information, administrators can
select the controller in the left panel and click the Properties
tab in the right panel.
•
Disk drives: Disk drive status is displayed in the left panel of
the application’s main window. To display a graphical view
of the disk drive, administrators can select the drive in the
left panel and click the Graphical View tab in the right panel.
•
Processes: Dell SAS RSM allows administrators to monitor the
progress of rebuilds, consistency checks, and other processes by
selecting Group Operations>Show Progress in the menu bar.
Upgrading controller firmware
Dell SAS RSM enables administrators to easily upgrade PERC 5/i
controller firmware without rebooting the system. Administrators
can perform a firmware upgrade as follows:
1.
Download the latest firmware packages from support.dell.com.
2.
In the left panel of the application’s main window, select the
appropriate PERC 5/i.
3.
In the right panel, click the Operations tab and select “Flash
Firmware,” then click the Go button.
4.
Browse for the .ROM update file and click the OK button.
5.
When prompted to confirm the upgrade, click the Yes button.
Enhancing SAS storage management
Dell SAS RAID Storage Manager, which comes preinstalled on Dell
PowerEdge SC servers and Dell Precision workstations, enables admin-
istrators to configure, monitor, and manage storage configurations on
SAS controllers. Dell SAS RSM tools can enhance flexibility when
managing storage devices in enterprise environments.
Manjusha Gopakumar is an engineer senior analyst in the Test Case Design
team at the Dell Bangalore Development Center.
Gagan Shrestha is a lead engineer in the Test Case Design team at the Dell
Bangalore Development Center.
Figure 2. Changing virtual disk properties in the Dell SAS RAID Storage Manager
Operations tab