Addonics AD5SARM6G Dépliant

www.addonics.com

Addonics Technologies Inc.

1918 Junction Avenue, San Jose, CA 95131

Phone: 408.573.8580 | Fax: 408.573.8588

FEATURES

SPECIFICATIONS

• Connect up to 5 SATA HDD/SSD or optical drives to a computer via a single eSATA port

• Up to 6 Gbits/sec when connecting to eSATA 3.0 port supporting this speed

• Compliant with SATA 1.0, 2.0 and 3.0 specification

• Require PM compatible eSATA port or host controller (SATA port with no PM support can detect only the drive 

  connecting to port 0)

• Designed to be mounted onto Addonics family of Storage Tower, Storage Rack or chassis with SCSI-I (Centronic 50) 

  punch-out

• Can be installed onto a standard add-on card slot - requires optional  PCI Converter Bracket (PCISCBKT)

• Drives appear as five individual drives to the system (in simultaneous data transfer, the maximum data transfer is that of 

  the slowest member of the five drives)

• Drives can be set to RAID via the software utility of the OS or the host controller

• Support hot swap

• Compatible with any SATA hard drive, SSD or SATA optical drives

• OS Support: depends on the attached SATA port

• Five (5) SATA port for device connection and one (1) eSATA port for host connection

• Full support for FIS switching and command-based switching SATA host controllers

• Auto-negotiation support for 1.5Gbps, 3.0Gbps  and 6.0Gbps SATA speed

• Compliant with SATA 1.0, 2.0 and 3.0 specification

• LED Pin Headers for Host & devices

• Small 4-pin Molex power connector

• Power consumption ~ 200 mA at 5V

• OS independent

• Maximum PCB dimension (W x L x H): ~ 56 x 84 x 24 mm ( 2.2 x 3.3 x ..94 in.)

• Weight: ~ 78 gm (2.75 oz)

• Operating temperature and humidity: 0 - 60 °C, 5 - 90 % RH

• Storage temperature and humidity: -20 - 70 °C, 0 - 95 % RH non-condensing