Logitech Harmony Ultimate 915-000201 Manuale Utente
Codici prodotto
915-000201
Logitech Harmony Ultimate
51
Troubleshooting
Setup problems
Once you complete the setup process through MyHarmony, your Harmony Ultimate remote control should work
properly to control your devices. Here are common troubleshooting tips. If you do not find the solution to your
problem here, the Harmony Ultimate
properly to control your devices. Here are common troubleshooting tips. If you do not find the solution to your
problem here, the Harmony Ultimate
can also help troubleshoot unique
issues. Refer to the Support
section for more information.
Symptom
Possible Cause
Solution
See Also
I tap an Activity and
one or more devices
does not turn on
one or more devices
does not turn on
The remote is out of
sync with your
devices
sync with your
devices
Use
to restore
synchronization.
By default all devices
are assigned to the
hub and blaster. If
one or more of your
devices needs to be
controlled by the
remote you will
need to assign it to
remote
are assigned to the
hub and blaster. If
one or more of your
devices needs to be
controlled by the
remote you will
need to assign it to
remote
Remove any physical obstructions or
reposition the mini blasters and try
again. If that doesn’t solve the problem,
use
reposition the mini blasters and try
again. If that doesn’t solve the problem,
use
to restore
synchronization.
The inter-device
delay time is too
short
delay time is too
short
Set the inter-device delay time to a
longer interval. Refer to Change delays.
longer interval. Refer to Change delays.
My devices turn on
but the wrong input
is selected
but the wrong input
is selected
The power on delay
for your device is too
short
for your device is too
short
Change the delay time using your remote
or with MyHarmony
or with MyHarmony
The wrong device
information is being
applied
information is being
applied
Make sure you entered the correct brand
and model numbers for your devices.
and model numbers for your devices.
The wrong input was
selected for that
Activity during
configuration
selected for that
Activity during
configuration
section, or in MyHarmony by
following the steps in Changing Activity