Bosch LBB 9600/20 LBB9600/20 Manuale Utente
![Bosch](https://files.manualsbrain.com/attachments/992db0bc6e4e397e226301d2fb6c3619baa82b37/common/fit/150/50/58e0935709337019a05abb2f9dc9475495d1a6775066eb5a72dc939185f4/brand_logo.png)
Codici prodotto
LBB9600/20
Communications Systems | LBB 9600/20 Condenser Handheld Microphone
LBB 9600/20 Condenser Handheld
Microphone
www.boschsecurity.com
u
Condenser transducer
u
Unidirectional
u
High speech intelligibility
u
Low sensitivity to case noise and vibrations
u
Phantom powered
This condenser microphone is based on an electric
transducer element in a sturdy housing with shielding
against wind and wind bursts (pops). It is intended for
public address and sound reinforcement applications,
such as in churches, theaters, and conference centers.
transducer element in a sturdy housing with shielding
against wind and wind bursts (pops). It is intended for
public address and sound reinforcement applications,
such as in churches, theaters, and conference centers.
Functions
The handheld LBB 9600/20 is an excellent microphone
with almost frequency independent, unidirectional
directivity. Its low equivalent input noise level and
insensitivity to stray electrostatic and electromagnetic
fields keep the audio signal free from spurious noise.
with almost frequency independent, unidirectional
directivity. Its low equivalent input noise level and
insensitivity to stray electrostatic and electromagnetic
fields keep the audio signal free from spurious noise.
The microphone has an on/off slide-switch and a 3‑pin,
lockable XLR plug. It uses a phantom power supply,
which is available on all microphone inputs on Bosch
public address amplifiers.
lockable XLR plug. It uses a phantom power supply,
which is available on all microphone inputs on Bosch
public address amplifiers.
It comes with a push-on clip with a Whitworth-
threaded screw fitting, and a multi-thread adaptor
(3/8", ½", and 5/8") for mounting. The supplied 7 m
(23 ft) connection cable has 3‑pin, lockable male and
female XLR connectors.
Accessories
threaded screw fitting, and a multi-thread adaptor
(3/8", ½", and 5/8") for mounting. The supplied 7 m
(23 ft) connection cable has 3‑pin, lockable male and
female XLR connectors.
Accessories
A number of accessories, such as extension cables,
table stands and floor stands are also available. See
the separate microphone accessories data sheet.
table stands and floor stands are also available. See
the separate microphone accessories data sheet.
Certifications and approvals
Region
Certification
Europe
CE
Declaration of Conformity