MuxLab 500026 Dépliant
MonoPro™ XLR
500025, 500026
©MuxLab 2004-2009 MonoPro XLR
Overview
The MonoPro™ XLR (500025, 500026) allows a
standard AES analog or digital audio channel to
be connected via Cat5e/6 unshielded twisted pair
cable (UTP) for the professional audio
environment.
The MonoPro™ XLR (500025, 500026) allows a
standard AES analog or digital audio channel to
be connected via Cat5e/6 unshielded twisted pair
cable (UTP) for the professional audio
environment.
The product features heavy duty cable strain
relief for rugged environments such as rental and
staging and is available with male or female
locking XLR3 connectors for added cabling
versatility. May also be used as a solderless
connection point for standard shielded audio
cable.
relief for rugged environments such as rental and
staging and is available with male or female
locking XLR3 connectors for added cabling
versatility. May also be used as a solderless
connection point for standard shielded audio
cable.
Benefits
Cost efficient cabling via UTP
Robust design for professional use
Cost efficient cabling via UTP
Robust design for professional use
Features
Line analog audio up to 5,000 ft (1.5km) via
Line analog audio up to 5,000 ft (1.5km) via
Cat 5
Digital audio up to 1,400 ft (426m) via Cat5e/6
UTP
Wires terminate inside balun
Locking XLR3 connector
Heavy-duty cable strain relief
Supports UTP or STP
UTP
Wires terminate inside balun
Locking XLR3 connector
Heavy-duty cable strain relief
Supports UTP or STP
Specifications
Analog Audio
Digital Audio
Environment
Balanced line level or
microphone analog audio
microphone analog audio
Balanced line level digital audio
Signal Amplitude
2.3 Vp-p
2 – 7Vp-p
Polariy Sensitive
Phase polarity sensitive
Not polarity sensitive
Impedance
Output: 600 Ω Input: 600-20kΩ
110 Ω
Signal type
Professional balanced analog line
level or microphone
level or microphone
Professional balanced digital line level
Maximum Distance via Cat5e/6
UTP
UTP
Line level: 5,000 ft (1.5 km)
Mic level: 3,000 ft (914m)
Mic level: 3,000 ft (914m)
Active microphone supported. Requires
ground pin connected at both ends.
Distance unspecified.
ground pin connected at both ends.
Distance unspecified.
Sampling Rate Distance
32 kHz 1,400ft (426m)
44.1 kHz 1,300ft (396m)
48 kHz 1,250ft (381m)
96 kHz unspecified
32 kHz 1,400ft (426m)
44.1 kHz 1,300ft (396m)
48 kHz 1,250ft (381m)
96 kHz unspecified
Frequency response
DC to 6 MHz
Pro Audio Devices
mixers, routers, switchers, format converters, splitters, distribution amplifiers,
boosters, receivers, encoders, CD players, DAT recorders, microphone pre-
amps, compressors, passive microphones, equalisers, active loudspeakers,
public address systems, rental and staging equipment.
boosters, receivers, encoders, CD players, DAT recorders, microphone pre-
amps, compressors, passive microphones, equalisers, active loudspeakers,
public address systems, rental and staging equipment.
Transmission
Transparent to the user.
Insertion Loss (per balun pair)
Less than 1 dB /pair from DC to 6 MHz
Return Loss
Less than 15dB from DC to 6 MHz
Common Mode Rejection (CMMR)
Greater than 45 dB
Cable – UTP
24 gauge or lower solid copper twisted pair wire impedance: 100 Ω at 1 MHz.
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
Maximum capacitance: 20 pf/foot. Attenuation: 6.6 dB/1000 ft at 1 MHz
Connectors
XLR3-M or XLR3-F depending on model
Two (2) screw terminals for signal
One (1) screw terminal for optional shield (ground)
Two (2) screw terminals for signal
One (1) screw terminal for optional shield (ground)
Pin Configuration
XLR3 Signal UTP
Pin 1 Shield Gnd (optional)
Pin 2 Positive Tip [T]
Pin 3 Return Ring [R]
Pin 1 Shield Gnd (optional)
Pin 2 Positive Tip [T]
Pin 3 Return Ring [R]
Cable Strain Relief
Threaded and tapered cable grip mechanism.
Temperature
Operating: 0° to 55° C. Storage:-20° to 85°C. Humidity: 95% non-condensing
Enclosure
Fire retardant plastic. UL94-V0
Dimensions
1.875” x 1” diam (4.76 cm x 2.54 cm diam) plus 5” (12.7cm) XLR3 lead
Weight
2.64 oz (75 gms)
Standards
AES/EBU 1982, AES-1992, ANSI S.40-1992, IEC-958
Regulatory
FCC, CE.
Warranty
Lifetime
Order Information
500025 MonoPro XLR, XLR3-M
500026 MonoPro XLR, XLR3-F
500026 MonoPro XLR, XLR3-F