Intel Pentium D 830 HH80551PG0802MN Scheda Tecnica

97

The Intel

®

 Pentium

®

 D processor will also be offered as an boxed Intel processor. Boxed Intel 

processors are intended for system integrators who build systems from largely standard 
components. The boxed Intel Pentium D processor will be supplied with a cooling solution known 
as the Thermal Module Assembly (TMA). 

 shows a mechanical representation of a 

boxed Pentium D processor. This chapter documents mainboard and system requirements for the 
TMA that will be supplied with the boxed Pentium D processor. This chapter is particularly 
important for OEMs that manufacture mainboards for system integrators. 

Unless otherwise noted, all figures in this chapter are dimensioned in millimeters and inches 
[in brackets]. 

Drawings in this section reflect only the specifications on the boxed Intel processor product. These 
dimensions should not be used as a generic keep-out zone for all cooling solutions. It is the system 
designer’s responsibility to consider their proprietary cooling solution when designing to the 
required keep-out zone on their system platforms and chassis. Refer to the Intel

Guidelines for further guidance. 

NOTE: The duct, clip, heatsink, and fan can differ from this drawing representation; however, the basic shape 

and size will remain the same.