Black Box MediaCento IPX PoE VX-HDMI-POE-VTX Manuale Utente
Codici prodotto
VX-HDMI-POE-VTX
BLACK BOX
®
| 3
724-746-5500 | blackbox.com/go/MIPX
MediaCento IPX PoE Extenders
MediaCento IPX PoE Multicast for Video Walls
• All the multicast extension capabilities of the standard
version, but for video wall connections.
• Scales source video for output on a video wall matrix.
• Video wall can be configured for multiple rows and columns.
• Use one transmitter to send video to all video wall receivers.
• Assign source video to any screen in a video wall.
• Easy to configure video wall image using Web-based
• Video wall can be configured for multiple rows and columns.
• Use one transmitter to send video to all video wall receivers.
• Assign source video to any screen in a video wall.
• Easy to configure video wall image using Web-based
interface.
MediaCento IPX PoE Unicast
A unicast version for point-to-point extension is also available:
NOTE: For the best performance, use with a switch with IGMP support.
For details, contact Black Box Tech Support. For a selection of switches, visit
blackbox.com/go/Networking.
For details, contact Black Box Tech Support. For a selection of switches, visit
blackbox.com/go/Networking.
This IP streaming solution unicasts HDMI video and audio to a distant screen
on your network. Use the MediaCento IPX Unicast system to distribute digital
signage content or other HD video and audio across an Ethernet network.
signage content or other HD video and audio across an Ethernet network.
The transmitter and receiver install directly into your existing LAN
infrastructure. The system packetizes signals so your HD source content can
be delivered anywhere over Ethernet wiring, supporting Full 1080p resolution
no matter what the distance, as well as all common PC resolutions (XGA,
SXGA, UXGA, WSXGA) up to 1920 x 1200 at 60 Hz.
be delivered anywhere over Ethernet wiring, supporting Full 1080p resolution
no matter what the distance, as well as all common PC resolutions (XGA,
SXGA, UXGA, WSXGA) up to 1920 x 1200 at 60 Hz.
For product specifications and ordering information, see the last page.
• Transmits HDMI video and audio over an Ethernet network
to a single monitor or display.
• Extends up to 328 feet (100 m) point to point but goes
even longer with network switches added to the mix.
• Visually lossless compression for very high image quality.
• Features EDID copy function and is HDCP compliant.
• Does not even require multicast or IGMP and can be used
• Features EDID copy function and is HDCP compliant.
• Does not even require multicast or IGMP and can be used
in any existing corporate Gigabit network.
Diagram Format
Rule Size: 0.013
Digital Display
MediaCento IPX PoE
Unicast Transmitter
(VX-HDMI-POE-UTX)
MediaCento IPX PoE
Unicast Receiver
(VX-HDMI-POE-URX)
IP
PC
Diagram Format
Rule Size: 0.013
MediaCento
™
IPX PoE Multicast
Transmitter for Video Walls
(VX-HDMI-POE-VTX)
HDMI
Cable
CATx Cable
IP
Layer 3 Switch
with IGMP
Digital Displays
HDMI Cables
CATx Cables
CATx Cables
MediaCento IPX PoE Multicast
Receivers for Video Walls
(VX-HDMI-POE-VRX)
Layer 3 Switch
with IGMP
PC
Multicast HDMI video and audio to a virtually unlimited number of screens
on a network and even output a single source video on video walls. The
MediaCento IPX PoE Multicast for Video Walls offers all the features of the
standard version, but also supports output to video walls, so you can create
eye-catching walls to project your message and content on a larger scale.
MediaCento IPX PoE Multicast for Video Walls offers all the features of the
standard version, but also supports output to video walls, so you can create
eye-catching walls to project your message and content on a larger scale.
The extender supports customizable monitor array sizes for any video wall
setup or application. A wall can be configured for multiple rows and columns.
You need just one transmitter and up to 64 receivers for an 8 x 8 wall. Each
receiver scales and outputs the correct part of the picture for its video wall
display. To configure video image output, simply access the system’s Web-
based interface. You don’t need to install any software on your source
equipment. Just plug in your HDMI source and begin configuring your matrix.
You need just one transmitter and up to 64 receivers for an 8 x 8 wall. Each
receiver scales and outputs the correct part of the picture for its video wall
display. To configure video image output, simply access the system’s Web-
based interface. You don’t need to install any software on your source
equipment. Just plug in your HDMI source and begin configuring your matrix.
For product specifications and ordering information, see the last page.