Brodit ProClip 854974 854974 Dépliant
Codici prodotto
854974
1.
2.
INSTALLATION INSTRUCTIONS
4.
3.
Please read all of the instructons and look at the pictures before attaching the ProClip. This ProClip consists of
two parts.
Part 1. Attaching part
Part 2. Mounting plate
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on Part 1. Place Part 1 so the adhesive tape is pointing downward, and press the grooved edge into the
gap between the frame surrounding the display and the panel in front of the display. Press until you hear/feel it
snaps into place.
2. Open the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 so the notch hooks into the upper
part of the air vent and the holes match the holes in Part 1.
3. Attach Part 2 onto Part 1 by using the enclosed screws.
4. The ProClip is in place.
two parts.
Part 1. Attaching part
Part 2. Mounting plate
1. Use the enclosed alcohol pad to clean the area where the ProClip is to be installed. Peel off the adhesive tape
cover on Part 1. Place Part 1 so the adhesive tape is pointing downward, and press the grooved edge into the
gap between the frame surrounding the display and the panel in front of the display. Press until you hear/feel it
snaps into place.
2. Open the predrilled holes in Part 2 with a screwdriver (Philips). Place Part 2 so the notch hooks into the upper
part of the air vent and the holes match the holes in Part 1.
3. Attach Part 2 onto Part 1 by using the enclosed screws.
4. The ProClip is in place.
2 (2)