Cisco TwinGig Converter Module CVR-X2-SFP= Scheda Tecnica
Codici prodotto
CVR-X2-SFP=
Data Sheet
All contents are Copyright © 1992–2007 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 1 of 4
Cisco TwinGig Converter Module
The Cisco
®
TwinGig Converter Module (Figure 1) offers investment protection for 10
Gigabit Ethernet switches (such as the Cisco Catalyst 4500, 3750, and 3560 E-Series
Switches), by enabling migration from Gigabit Ethernet to 10 Gigabit Ethernet uplinks
based upon business needs, without having to upgrade the switches or modules.
Figure 1. Cisco TwinGig Converter Module
The TwinGig SFP Converter Module (Figure 2) converts a 10 Gigabit Ethernet X2 interface into two
Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports. This way, customers can initially use
the switch with Gigabit Ethernet uplinks (Figure 3) and later implement 10 Gigabit Ethernet uplinks
as business demands change, without having to upgrade the access layer.
The TwinGig SFP Converter Module can also be used with the Cisco Catalyst 4500 E-Series
Supervisor 6-E (Figure 4) and the Cisco Catalyst 4500 E-Series 6-Port 10 Gigabit Ethernet Line
Card (Figure 5).
Figure 2. Cisco TwinGig Converter Module Converts a 10 Gigabit Ethernet X2 Interface into Two Gigabit
Ethernet SFP Ports in the Catalyst 3750-E and Catalyst 3560-E Series Switches.