Brodit ProClip 532387 532387 Dépliant

Lithium-based 
Lithium charging is based on CVCC (Constant Voltage Constant Current). The charging procedure is as 
follows: 

If the battery is empty or has low charge a constant current charges the battery until the cell voltage 
reaches 8,4V. The LED emits red light. Hereafter the charge continues until the current goes down to 0A. 
The battery is now full and stays fully charged. A special designed voltage controller is monitoring that the 
cell voltage is within limit. The LED emits green light. 

If the battery is used without disconnecting the charger, current is supplied directly resulting in a fast 
recovery. 

Battery Chemistry 

Li-ion or Li-Poly batteries 

Compatible batteries 

 

Input Voltage 

11-30 V 

Charging Voltage 

8.4 V 

Timer for Max. Charging Time 

Automatic, stops at 8.4 V 

Max. Charging Time 

2-3 hours depending on battery capacity 

Rapid Charge 

1 A +/- 5% 

Trickle Charge 

 0 to 50 mA   

LED  Charging Indicator 

LED Red to Green indicator  

Temperature Control 

Controlled by battery   

Operating Temperature 

-40° C to + 50° C / -40° F to 122° F   

(can be restricted by battery chemistry) 

EMI/RFI  

CE, E, FCC Part 15 Class B, ICES-003 Class B

 

Environmental RoHS 

Compliant 

Electrical Testing 

ISO 7637 and SAE J1455 

Input Transient Protected 

Withstands +200V & -600V. A 2,5A fuse is mounted on the incoming 
supply.  

Output Short Circuit Protected  

The charger will supply a maximum current of 1 A which protects both 
the charger and the connected equipment. The current limit is set to 
standards of the producer and shall not be higher.