Datalogic 94ACC0084 Dépliant
Memor™ X3 Single Slot Dock
The Memor X3 Single Slot Dock paired with one Memor X3 mobile computer builds a reading system for
the collection, decoding and transmission of barcoded data.
The communication between the mobile computer and host PC through the Memor X3 Single Slot Dock
may occur also by using the standard ActiveSync® connection.
Figure 1 – Memor X3 Single Slot Dock
A) LED
Indicators
B)
Mobile Computer Contacts
C) Spare Battery Slot
D) Mini USB Connector
E) RS232
Connector
F) Power
Jack
The Memor X3 Single Slot Dock is a serial communication adapter between the host computer and the
Memor X3 mobile computer, and as such, no power supply is required to be connected to the Dock for
communications.
Since the Memor X3 Single Slot Dock also functions as a battery charger, a power supply is required for
battery recharging operations, both for the mobile computer and spare battery pack recharging.
The spare battery pack recharging slot is compatible with the following batteries:
Memor X3 mobile computer, and as such, no power supply is required to be connected to the Dock for
communications.
Since the Memor X3 Single Slot Dock also functions as a battery charger, a power supply is required for
battery recharging operations, both for the mobile computer and spare battery pack recharging.
The spare battery pack recharging slot is compatible with the following batteries:
94ACC1367 DL-Memor Large Capacity Battery
3.7V at 2000mAh
3.7V at 2000mAh
94ACC1368 DL-Memor Standard Battery
3.7V at 1100mAh
3.7V at 1100mAh
94ACC0084 Memor X3 Large Capacity Li-Ion Battery
3.7V at 2300mAh
3.7V at 2300mAh
94ACC0083 Memor X3 Standard Battery
3.7V at 1430mAh
3.7V at 1430mAh
©2013-2014 Datalogic ADC S.r.l. • ALL RIGHTS RESERVED. • Protected to the fullest extent under U.S. and international laws. •
Copying, or altering of this document is prohibited without express written consent from Datalogic ADC S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the
E.U. Memor and the Memor logo are trademarks of Datalogic ADC S.r.l. All other brand and product names mentioned herein are
for identification purposes only and may be trademarks or registered trademarks of their respective owners.
Copying, or altering of this document is prohibited without express written consent from Datalogic ADC S.r.l.
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including the U.S.A. and the
E.U. Memor and the Memor logo are trademarks of Datalogic ADC S.r.l. All other brand and product names mentioned herein are
for identification purposes only and may be trademarks or registered trademarks of their respective owners.
822001530 (Rev. A)
MOBILE COMPUTER INSERTION/ REMOVAL
By inserting the Memor X3 into the dock, data can be transmitted to the host and its battery begins
charging if the power supply is connected. In addition, a spare battery can be charged by inserting it into
the slot at the back of the Memor X3 Single Slot Dock as shown in the following figure.
Figure 2 – Memor X3 Single Slot Dock Charging and Communication
LED INDICATORS
The LEDs positioned on the front part of the Memor X3 Single Slot Dock(see figure below) indicate the
dock and spare battery charger status:
Figure 3 - LED Indicators
LED STATUS
Charger
Red Constant
Spare battery charging
Green Constant
Spare battery charge completed
Power
Green
it is constant when the dock is powered
During charging, the LED may turn off to indicate a temporary suspension of charging.
A
B
C
D
E
F
Spare battery Charge
Slot with Spare
Battery Inserted
Data Transmission and Mobile
Computer Battery Charging
Spare Battery
Charger LED
Power LED