Neolt Sword 310 Q626/310 Manuale Utente
Codici prodotto
Q626/310
NEOLT FACTORY
Via G. Galilei, 8 24036
Ponte S. Pietro (BG) ITALY
Ponte S. Pietro (BG) ITALY
Tel: 035468811
Fax: 035468886
E-mail: info@neolt.it
www.neoltfactory.com
CONTACT
This datasheet is subject to change without notice.
Copyright © Neolt Factory 2013
Fixed blade “1” Thickness from
1 to 30 mm.
Materials:
1 to 30 mm.
Materials:
Cardboard
Foam Kmount
Gato foam
Spongy media
Plastic expanded
polhyurethane
Film
Plastic alveolar
Reboaed
Fixed blade “2” thickness from
1 to 10 mm.
Materials:
1 to 10 mm.
Materials:
Leather
Forex
Plastic from 0,5mm.
You carry out the cut in two
steps:
1) from up to down.
2) Down to up
steps:
1) from up to down.
2) Down to up
“3” Optional.
Blade for Dibond thickness from 1 to 4 mm.
Vcut blade thickness from 5 mm to 30 mm.
Materials:
Blade for Dibond thickness from 1 to 4 mm.
Vcut blade thickness from 5 mm to 30 mm.
Materials:
Reboard
Spongy media
Plastic expanded
Blade Glasscut: glass from 1 to 2 mm
Blade PlexCut: plexiglas from 1 to 3 mm
Blade PlexCut: plexiglas from 1 to 3 mm
Millimetric base for tool positioning.
Light body frame but strong and reliable.
Quick tools change: with two units always installed and a third optional
Two rotary blades: one moving and one fixed for forex e foam.
Tool for dibond and aluminium cut.
V-cut tool for cardboard angular cut at 60°and 90°
Diamond wheel for glass engraving.
Oversize and strong support base to feed big dimensions panels
Available in two heights: 165, 210 or 310 cm.
Main features: